Is it OK to use 5w30 instead of 5w40?

Is it OK to use 5w30 instead of 5w40?

Takeaway. If you are racking your brain to choose between 5w30 and 5w40, we recommend you go with 5w30. However, if it is too expensive or not available for use, you can always go with the 5w40, which is just as good and will not cause any damage to the engine parts.

Can you mix 2 different brands of oil?

Yes, you can safely mix one brand of oil (e.g. Mobil 1) with a different brand (e.g. AMSOIL) or conventional oil with synthetic oil (in fact, that’s what a synthetic blend is). Most synthetics today are fully compatible with conventional oils and can safely be mixed.

What happens if you put 5W20 instead of 5w30?

If you put in 5W-30 oil instead of 5W-20 when the latter is the grade suggested by your vehicle’s manufacturer, damage to internal engine parts can occur. Additionally, your engine may experience performance issues such as diminished fuel economy and horsepower.

What happens if you put 10w30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Is it OK to put 10w40 in a 5w30?

The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Can I mix 10W 40 with 5w30?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. Mixing different oils will not improve the performance or efficiency of the engine in any way.

Will using 10w 40 an on engine that is asking for 5W 30 negatively affect my engine if yes in what ways?

Using a lower hot oil weight specification, such as 30 instead of 40 will result in less energy lost due to the oil pump having less resistance to pumping and also more viscous oil may make the engine have overall more mechanical losses while rotating.