Is the Ford 352 a good engine?
In the day, the 352 was the “Intercepter Special V8” motor used by police departments everywhere. If you’re talking about one of the Ford FE engine 352s (made from 1958 to 1976), then yes, it’s a very good engine.
How much horsepower does a Ford 352 have?
In 1960 Ford created a high-performance version of the 352 rated at 360 horsepower (270 kW) it featured an aluminum intake manifold, Holley 4160 4-barrel (4-choke) carburetor, cast iron header-style exhaust manifolds, 10.5:1 compression ratio, and solid lifters.
What is the difference between 351W and 351M?
A 351W intake is about an inch to an inch and a half wider. The 351C (Cleveland) and 351M/400 (most commonly referred to as “Modified”) are very similar engines…they are the engines that make up the “335” series of Ford engines. Basically, the 351M/400 is a tall-deck version of a 351C.
Is the Ford 351 a good engine?
the 351w is a very good engine, it can handle a lot of power before the block splits, that usually happens at around 800hp. the 351m is an ok engine, good for use in trucks and for the basis of building a good 400. the 351c on the other hand is tough to beat, even by the chevy 350.
What year 351W is best?
Best years From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.
Is the 351 Windsor a big block?
The 351W is named for the factory in Windsor, Ontario that produced them. It is part of the long-running Ford small-block Windsor V8 family, which also includes the venerable Ford 302 (5.0L) V8. It shares the same small block V8 bellhousing pattern and motor mounts of the August 1964+ Windsor engines*.
How much oil does a 351W take?
It will be 5 quarts plus the oil filter which will hold another 1/2 to 3/4 quart.
How many quarts of oil does a 1997 7.3 take?
The 7.3 diesel Powerstroke engine’s oil capacity is 15 quarts of 15W40 grade diesel engine oil. A 7.3 Powerstroke holds 13 quarts of oil in the crank case/oil pan area and almost 2 quarts in your 7.3’s oil filter.
What kind of oil does a 1996 Ford f250 take?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
How much oil does a 1996 f250 take?
6 quarts with the filter change.
How much oil does a 7.5 liter Ford take?
Capacity: 6 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
How much transmission fluid does a E4OD hold?
Ford E4OD Transmission Specs
| Transmission: | Ford E4OD | |
|---|---|---|
| Transmission Filter P/N: | 2WD applications | Motorcraft FT-113 |
| 4WD applications | Motorcraft FT-114 | |
| Fluid Capacity: | ~ 17 – 18 quarts | |
| Service Intervals: | Replace automatic transmission fluid and filter at 30,000 mile intervals. | |