What are 3 main types of induction training?

What are 3 main types of induction training?

What Are The 3 Main Types Of Induction Training?

• Pre-Induction: information provided prior to the new employee starting work.
• Induction: The first day and subsequent transition into the workplace.
• Post-Induction: follow-up and adjustment after the new role has started.

What is the process of induction?

Induction is the use of medications or other methods to bring about labor. It’s a two-step process that jump-starts cervical ripening and stimulates labor contractions. Inducing labor can take anywhere from a few hours to a couple of days, depending on your body’s response and whether it’s your first pregnancy.

What is self induced emf?

Definition: Self-induced emf is the e.m.f induced in the coil due to the change of flux produced by linking it with its own turns. This phenomenon of self-induced emf can be further understood by the following example given below: Consider a coil having N number of turns as shown in the above figure.

What is difference between EMF and MMF?

EMF stands for electro motive force,its the driving force required for the movement of electrons in an electrical circuit. MMF stands for magneto motive force,it is the driving force required to drive the magnetic flux through a magnetic circuit.

What is difference between voltage and EMF?

Emf is the voltage developed between two terminals of a battery or source, in the absence of electric current. Voltage is the potential difference developed between the two electrode potentials of a battery under any conditions.

What is EMF and MMF method?

The EMF method is also called pessimistic method as the value of regulation obtained is much more than the actual value. The MMF method is also called optimistic method as the value of regulation obtained is much less than the actual value.

Why EMF method is called pessimistic method?

In EMF method, the voltage drop due to armature resistance (Ra) and the drop due to synchronous reactance(XS) is considered, both the drops are emf quantities. This method is also called pessimistic method, because the voltage regulation obtained by this method is more than the actual value.

What is meant by synchronous impedance?

The synchronous impedance is determined from the O.C.C and S.C.C. It is the ratio of the open-circuit voltage to the short circuit current. When the O.C.C and S.C.C are linear, the synchronous impedance ZS is constant. The flux under test conditions is the same as that under load conditions.

Which method is called pessimistic method?

Synchronous impedance method gives result which is higher than the original value. That’s why it’s called the ‘pessimistic method’. Armature turn or mmf method gives value which is lower than the original value. That’s why it’s called the ‘optimistic method’.

What is OCC and SCC?

The open circuit characteristic (O.C.C.) and short circuit characteristic (S.C.C.) are drawn on the same curve sheet. the synchronous impedance Zs will then be equal to the open circuit voltage divided by the short circuit current at the field current which gives the rated e.m.f. per phase.

What is the meaning of voltage regulation?

In electrical engineering, particularly power engineering, voltage regulation is a measure of change in the voltage magnitude between the sending and receiving end of a component, such as a transmission or distribution line.