What are some good safety topics?

What are some good safety topics?

10 Everyday Workplace Safety Topics for Meetings

• General Safety Mistakes.
• Ergonomic and Workplace Stress.
• Drugs on The Job.
• Violence at The Workplace.
• Fire and Electrical Safety.
• Workplace Accidents: Reporting, Prevention, And Costs.
• Heat Exhaustion and Safety.
• Workplace Injuries.

What are the required OSHA training topics?

General Industry

• Occupational Noise Exposure.
• Hazardous Waste Operations and Emergency Response.
• Respiratory Protection.
• The Control of Hazardous Energy (Lockout/Tagout)
• Fire Brigades.
• Portable Fire Extinguishers.
• Fixed Extinguishing Systems.
• Machinery and Machine Guarding.

What are the requirements of OSHA?

Provide a workplace free from serious recognized hazards and comply with standards, rules and regulations issued under the OSH Act. Examine workplace conditions to make sure they conform to applicable OSHA standards. Make sure employees have and use safe tools and equipment and properly maintain this equipment.

What is full form of OSHA?

Occupational Safety and Health Administration

Can you file an anonymous OSHA complaint?

If you file a complaint, OSHA will contact you to determine whether to conduct an investigation. You must respond to OSHA’s follow-up contact or your complaint will be dismissed. A whistleblower complaint filed with OSHA cannot be filed anonymously.

Do you have to post OSHA complaints?

Posting Requirements When you receive an OSHA Notice, you must post it (or a copy of it) at or near the place where each violation occurred to make employees aware of the hazards to which they may be exposed. The OSHA Notice must remain posted for 3 working days or until the hazard is abated, whichever is longer.

What are two types of fall protection?

Two basic types of fall protection are travel restraint and fall arrest. Both involve wearing a full-body harness. A travel restraint system keeps you from getting too close to an unprotected edge. The lifeline and lanyard are adjusted to let you reach the edge but not fall over it.

What is passive fall protection?

A “passive” fall protection system refers to a system that is non-dynamic, stationary, and does not move or adapt or change when in or out of use. They do not require the use of Personal Protective Equipment or active participation from the worker. Typical passive solutions include Guardrails or Netting Systems.

How can we reduce fall hazards?

Top Five Ways to Reduce Fall Hazard Risk

1. #1: Apply Prevention through Design. The first and best way to reduce fall hazard risk is to eliminate it before it’s ever created.
2. #2: Perform and Use a Fall Hazard Risk Assessment — the Right Way.
3. #3: Use Less PPE.
4. #4: Focus on Certified Systems — Not Equipment.
5. #5: Provide Quality Training.

What is a fall prevention system?

Fall prevention refers to a system that prevents or eliminates the hazard of a fall. Fall protection refers to equipment used to mitigate or limit the effects of a fall from a height. The fall potential can’t be eliminated, but a person will be protected if it does happen.

What is the maximum amount of open space allowed when covering floor holes?

2 inches wide

What is the difference between a hole and an opening OSHA?

So according to OSHA, not only is the location of a hole different than an opening (walking surface vs. wall), but so is the physical size of the void into which – or through – a worker may fall.

What does OSHA consider a hole?

OSHA’s construction fall protection rule, 29 CFR Subpart M §1926.500, defines these terms as follows: “Hole means a gap or void 2 inches (5.1 cm) or more in its least dimension, in a floor, roof, or other walking/working surface.”

What size hole requires a cover OSHA?

6 feet

What does the term floor hole mean?

Floor hole: an opening measuring less than 12 inches but more than 1 inch in its least dimension, in any floor, platform, pavement, or yard, through which materials but not persons may fall; such as a belt hole, pipe opening or slot opening.

Which is the best fall control OSHA?

1. Hazard Elimination. The preferred solution to all fall hazards is elimination.

What is the first line of defense in all workplace emergencies?

Engineering controls