What are the required OSHA training topics?

What are the required OSHA training topics?

General Industry

• Occupational Noise Exposure.
• Hazardous Waste Operations and Emergency Response.
• Respiratory Protection.
• The Control of Hazardous Energy (Lockout/Tagout)
• Fire Brigades.
• Portable Fire Extinguishers.
• Fixed Extinguishing Systems.
• Machinery and Machine Guarding.

What are some of the things your employer should do to prevent worker falls and accidents using portable ladders at the workplace?

There are several things employers can do to prevent falls and accidents from workers using portable ladders….Answer:

• use appropriate stairs for each task.
• maintain the stairs.
• signal the places where a ladder is being used.
• follow established safety procedures for the use of stairs.

What are the training requirements for competent person for fall protection?

A 40-hour, instructor-lead program is the industry norm for Competent Person training when the Competent Person is expected to use a variety of fall protection systems, evaluate hazards, write procedures, and supervise others.

Does a competent person need certification?

The standard does not specify particular training requirements for competent persons. Finally, the definition of a competent person requires the individual to have the authority to take prompt corrective action. No course can provide that authority, since it can only be provided by the employer.

What item is an example of fall protection?

Scaffolds, handrails, barriers and movable platforms can be constructed to protect workers employed at heights. Where these devices are impractical, personal fall protection equipment such as full body harnesses, lanyards and retractable lifelines may be used.

What is the best example of a fall prevention system?

Physical barriers like guardrails around unprotected edges and covers over holes are examples of passive fall protection. Passive protection is generally considered to provide a higher level of safety since the opportunity for error is less than using personal protective equipment (PPE).

What’s the difference between fall protection and fall prevention?

It’s important to understand the differences between fall prevention and fall protection. Fall prevention refers to a system that prevents or eliminates the hazard of a fall. Fall protection refers to equipment used to mitigate or limit the effects of a fall from a height

What is primary fall protection?

Primary fall arrest systems are preventive safety measures designed to stop falls from happening in the first place – as opposed to secondary fall arrest systems which are designed to arrest a fall after it has happened.

What are the 3 types of falls?

Falls can be categorized into three types: falls on a single level, falls to a lower level, and swing falls. In this week’s post we’ll examine these three types of falls and how understanding your workplace fall hazards can help you select the proper fall protection system.

At what height do you need a harness?

6 feet

Do safety harnesses expire?

There is no such thing as a predetermined or mandated expiration date on fall protection harnesses. Neither OSHA nor ANSI have current codes or standards that set a specific time period for taking a harness out of service. Even most manufacturers will not suggest how long a harness will last.

Is fall protection required on a ladder?

Portable ladders: fall protection is not required for employees climbing or working on portable ladders. Neither the ladder standard (29 CFR 1926, subpart X) nor the fall protection standard (29 CFR 1926, subpart M) requires fall protection for workers while working on portable ladders.

What is 100 tie off in fall protection?

100% Tie-Off Often, jobsite workers encounter dangerous situations when moving from one location to another while working at height. Maintaining 100% tie-off allows the worker to remain connected and protected at all times. In 2017, OSHA mandated the 100% tie-off regulation for fall protection of workers at height

Which of the following is a fall protection device that could be used with ladders?

Since these surfaces are at or over 6 feet above the next lowest level, fall protection is required while the worker is on those surfaces. Fall protection can be accomplished by using guardrails, a personal fall arrest system, a fall restraint device, or safety net system.

Which devices are used to break a fall from heights?

Examples of these systems are: ladders, scaffolds, elevating work platforms, vehicle-mounted aerial devices, suspended access equipment (swing stage), boatswain’s chairs and mast- climbing work platforms

How do you inspect fall protection?

Inspect all hardware including, but not limited to, hooks, buckles and D-rings. Look for any cracks or malfunction….Inspection instructions

1. Stitching and webbing.
2. Broken strands.
3. Inspect all hooks, D-rings and all other metal parts.
4. Destroy and replace all worn or damaged equipment.

Can you tie off to a handrail?

OSHA has determined that when a standard guardrail is not feasible because it would result in impairment of the work being performed alternate protection may be provided for employees. A tie-off system is acceptable as a method of meeting the intent of Section 1910.23(c)(1).

What is free fall distance?

Free Fall Distance First, Point 1 is the point at which the lanyard attaches to the harness while in use by the worker on the working surface. The distance between Point 1 and Point 2 equals the Free Fall Distance. This distance can’t exceed six feet

What is the formula of free fall?

Free fall means that an object is falling freely with no forces acting upon it except gravity, a defined constant, g = -9.8 m/s2. The distance the object falls, or height, h, is 1/2 gravity x the square of the time falling. Velocity is defined as gravity x time.

What is the maximum safe free fall distance?

Fall-arrest systems, incorporating a lanyard, should be installed so that the maximum distance a person would free fall before the fall-arrest system takes effect is two metres.

What is free fall in fall protection?

Remember, free fall with an SRL is measured as the vertical distance between the anchor point and the dorsal D-ring on your harness. ‘ If you were to fall from that dizzy height, you will fall 16’ until your D-ring is even with the SRL at which time the SRL would start to arrest the fall

What are two most important things to know for calculating fall clearance?

Anchor position, lanyard length, deceleration distance, height of the suspended worker, and safety factor are good starting points when attempting to properly calculate fall distance clearance and PPE requirements, but remember there may be additional variables that need to be considered The type of PPE, position of ..