What does a story pole do?
Story poles are three-dimensional, full-scale, silhouette structures that outline the location, bulk and mass that a proposed structure or addition will occupy on a site. Story poles allow staff, neighbors and others to assess the location and general massing of a proposed building from various vantage points.
What is a story pole in construction terms?
: a pole cut to the proposed clear height between finished floor and ceiling and often marked with minor dimensions (as for door trims and dadoes) that is used especially by carpenters and bricklayers.
Why is it called a story pole?
Story poles, in one form or another, have helped builders of all kinds for aeons. Ancient Egyptians used them in constructing the pyramids. Eighteenth-century house framers used them to keep track of ceiling-joist heights (hence the name).
What is another name for a story pole?
A storey pole (or story pole, storey rod, story stick, jury stick, scantling, scantillon) is a length of narrow board usually cut to the height of one storey.
What is a story pole and how is it used in pipeline layout?
Story poles are often used to assist in the construction design process or may be required by a local agency prior to project approval. They help to represent the silhouette of a proposed structure or possible addition to an existing building.
What is a story pole used for when installing shingle or lap siding?
A water level, chalk line, or some combination of other tools can help establish the proper point. The story pole is sometimes used horizontally, as well, to lay out joist or other framing details that are repeated in a structure.
What does exposure of a shingle mean?
A shingle’s exposure is the portion of the shingle left uncovered by the one above it. Proper shingle exposure is achieved by carefully layering the shingles as you work up the roof plane. The proper shingle exposure can depend on the size of the shingle, its material and the desired look of the roof.
How many inches does a shingle cover?
The standard asphalt shingle exposure is 5-inches. Metric-measure shingles might have 5 5/8″ exposure. If your roof was installed with an 8-inch exposure I worry that it was an improper job from day one.
What is a 3-tab shingles?
3-Tab Shingles Roofers refer to a shingle as 3-Tab because it is made up of three individual tabs that are a 12” wide. 3-Tab shingles come in either 20yr, 25yr, or 30 yr warranties. Like Architectural shingles, 3-Tab roofing shingles are asphalt-based products that work by shedding water to the shingle below.
What is a horizontal row of shingles called?
Row of shingles that can run horizontally, diagonally or vertically and sometimes termed the run of the shingle.
What is the first row of shingles called?
For the first row of shingles, called a starter course or strip, you cut the tabs off three-tab shingles and apply them with the self-sealing adhesive strip facing up along the eave. The starter course protects the roof by filling in the spaces under the cutouts and joints of the next row (first course) of shingles.
What material is used under shingles?
What is roofing felt paper? Sometimes called roofing felt underlayment, roofing tar paper, or roll roofing, this is a layer of protection installed between the roof deck and the roofing shingles.
What is Dutch lapping shingles?
Dutch lap method: Application of giant individual shingles with the long dimension parallel to the eaves. Shingles are applied to overlap adjacent shingles in each course as well as the course below.
How many bundles of shingles does it usually take to make one square?
three bundles
What is a strip shingle?
A starter strip is an asphalt based shingle utilized to waterproof the eave and rake edges of your home during a re-roof. Adhesive tar strips help prevent shingle blow-off from harsh winds (along eaves as well). A straight line to properly orient each new row of shingles.