What does the nameplate on a forklift tell you?

What does the nameplate on a forklift tell you?

The nameplates, also called data plates (the two terms are used interchangeably), on a forklift are an important piece of this safety puzzle. They indicate exactly how much load can be put on a forklift taking into account things like truck weight and attachments.

What information can be found on your forklift data plate?

Sometimes referred to as a capacity plate or a forklift nameplate, the forklift data plate includes important information such as weight, fuel type, and forklift load capacity. Associates need to read the data plate during training and before use to help build the culture of safety in your facility.

How do you read a forklift plate?

How to Read a Forklift Data Plate

1. Forklift Model. The forklift model the rating plate is attached to is clearly stated at the top of the plate.
2. Forklift Serial Number.
3. Year of Manufacture.
4. Nominal Power.
5. Attachment.
6. Truck Weight.
7. Forward Back Tilt.
8. Tyre Information.

What does the manufacturer’s data plate or nameplate list?

To achieve this, forklifts are equipped with a nameplate, also called the data plate or forklift capacity plate. The data plate includes vital information about the forklift, such as its fuel type, weight, and forklift load capacity.

What does a capacity plate indicate?

A boat operator should never take a boat on the water with too many people or too much gear on board. This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather. …

What info is on a capacity plate?

Your boat’s capacity plate will include the following information: The maximum passenger weight (in lbs.) and the equivalent number of adult passengers. The total maximum weight (in lbs.)

How is SWL of forklift calculated?

It is easily calculated by measuring the load to be carried, and dividing by two (providing the load is evenly distributed, and positioned to butt up to the forklift backrest). You will often see a forklift truck’s nominal capacity quoted in a form such as 2,000kg @ 500mm load center.

How is forklift load chart calculated?

A couple of simple calculations are all that’s necessary:

1. Divide the load center as stated on the data plate by the actual load center (in the example above, that would be 24/36=. 6666).
2. Multiply this result by the rated load capacity (4000X. 6666=2666.6).

What is the balance point of a forklift?

On a sit-down counterbalanced forklift, the fulcrum or pivot point is the axle of the front wheels.

What is inching on a forklift?

The purpose of the inching pedal is to disengage the transmission without having to shift the gear lever into neutral every time a lift is performed. This pedal allows you to bring the forklift to a stop or to slow it down. This pedal allows you to adjust the rotational speed of the engine.

What is a forklift hazard?

Forklift hazards often occur when there is a change of balance for the vehicle. Lifting materials up high can cause the machine to overturn or for its load to fall. If your warehouse forklift has to lift workers at any time, ensure that the correct attachments are used to reduce the risk of a fall or other injuries.

How do you maintenance a forklift?

6 Forklift Maintenance Tips to Help You Maintain Safety

1. Inspect your machine daily as part of a comprehensive forklift maintenance plan.
2. Follow the manufacturer’s recommended maintenance schedule.
3. Check your forklift’s tires regularly.
4. Clean your forklifts weekly as part of your forklift maintenance plan.

How much does it cost to maintain a forklift?

The annual maintenance costs for an electric forklift are approximately one-third of what it costs to maintain a similar internal combustion (IC) forklift. For example, a single-shift operation might spend $500 per year to maintain their electric lift truck versus $1500 per year for a diesel or LP forklift.