What happens when you pull the pin on a fire extinguisher?
If you pull the pin on a fire extinguisher nothing will happened. It just release the safety so the activation handle can be depressed. The fire extinguisher wont work until someone depress the activation handle and will stop when the activation handle is released.
What does it mean when a fire extinguisher pulls?
Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good.
When squeezing the handle of a fire extinguisher it is important to?
Squeeze the handle or lever slowly to discharge the agent. Letting go of the handle will stop the discharge, so keep it held down. Sweep side to side approximately 6in or 15cm over the fire until expended. The sweeping motion helps to extinguish the fire.
What is the correct procedure for using a fire extinguisher?
A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.
What should I look for when buying a fire extinguisher?
Make sure the can, hoses and nozzles aren’t damaged, dented, or rusted. Remove any dust, oil, or grease that might be on the outside of the extinguisher. Check manufacturer guidelines and instructions. Some extinguishers need to be shaken monthly, others need to be pressure tested every few years.
Why is my carbon monoxide detector beeping every 30 seconds?
It probably means your CO alarm has reached its end of life and should be replaced. CO alarms have a life expectancy of around seven years. The CO alarm will beep every 30 seconds or display ERR or END. If a CO alarm is at its end-of-life, replacing the battery will not stop the beep.