What ingredient is required to begin the chain reaction in a nuclear power plant?
What is a chain reaction? Let’s start at the beginning. The primary active ingredient in the fuel for a nuclear reactor is a particular variety, or “isotope,” of uranium, called U235.
Which power plant is most efficient?
Chubu Electric Nishi-Nagoya power plant
Which has highest operating cost?
Which of the following have highest operating cost? Explanation: Operating cost of hydroelectric and Solar Power Plant are very low because they don’t need fuel. In nuclear power plant fuel required is of very small quantity as compared to coal required by thermal power plant.
Which has highest diversity factor?
The residential load has the highest diversity factor. Industrial loads have low diversity factors usually of 1.4, street light practically unity and other loads vary between these limits.
Which is the cheapest plant in operation and maintenance?
steam power plant
What is the main disadvantage of two part tariff?
Q4. What is the main disadvantage of two port tariff? a. He has to pay semi fixed charges.
What is kVA maximum demand tariff?
Maximum Demand Tariff consists of two parts, i.e. demand charge and energy charge. The demand charge is based on the maximum demand in kVA, while the energy charge depends on the energy consumption in Unit (kWh) of the month. Tariff charges are subject to a minimum of 100 kVA of the chargeable demand.
Which tariff is used for domestic consumers?
Application Generally applied to domestic consumers and small commercial consumers. consumer and the units consumed, it is called a two-part tariff. running charges. running charge will depend upon the energy (units) consumed.
Which tariff is used by the small commercial consumers?
Maximum demand tariff
What is the power factor tariff?
demand meter is required. 6. Power factor tariff: The tariff in which power factor of the consumer’s load is taken into consideration is known as power factor tariff.In an a.c. system, power factor plays an important role. A low power factor increases the rating of station equipment and line losses.