What is a 410 gear ratio?
A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. A lower gear (higher numerical) ratio provides more low-speed wheel torque, which makes it easier to get the vehicle moving when pulling a trailer or carrying a heavy load.
What is the best gear ratio for off roading?
Not all gear ratios are available so you have the choice between 4.88 and 5.13, 4.88 being the closest. Choose a little bit lower gear ratios if you do a lot of off-road driving and a little bit higher if you do more long distance highway trips.
What is a 3.42 gear ratio?
Axle ratios may be expressed in notation as something along the lines of “3.42:1,” or a “3.42 rear axle.” In either case, it essentially means the drive shaft and pinion need to rotate 3.42 times in order to rotate the axle shafts once.
Do I need to Regear Rubicon for 35s?
Well-Known Member. You’re fine without regearing, as others have said/. If oyu move to 37s, that’s where the consideration should be. WIth a bigger than stock tire though, you likely will rub if you are wheeling and getting flexy with the suspension.
Should I Regear with 33s?
You don’t need to regear with just 33’s. Most likely, the reason behind you ‘drag’ is the width of the tires. You sure won’t be turning them over any time soon. The regearing won’t do damage or harm to the jeep, but it ‘may’ void your warranty on the axles.
What is the largest tire you can run on a stock JK?
It is true that the largest diameter tire you can fit on a stock JK without issue (read on) is 33” in diameter. With this diameter, you shouldn’t have any issues on the street. However, you could get some contact with your fenders if you flex offroad.
Can you put 35-inch tires on 17 inch rims?
Pick a Combo 33-inch tires work well with rims that measure 15 or 16 inches in width, while 35-inch tires should only be used with rims that are at least 17-inches wide. Larger tires require wider rims to maximize the tire profile and improve your Jeep’s maneuverability.