What is a track bar on a Jeep TJ?

What is a track bar on a Jeep TJ?

Jeep Wrangler TJ track bars are simple devices that connect one end of the axel to the frame of the chassis on the other side of the vehicle. The pivots of the track bar allow either end to swivel up and down, but not side to side. Sahara, Sport, Rocky Mountain, Rubicon, Unlimited Wranglers.

What does a track bar do?

The track bar restricts the suspension from moving side to side, which could damage the vehicle. It connects one end of the axle to the car body on the other side of the vehicle. Both ends are connected with pivots that allow the bar to move up and down.

What is the bar on the front of a jeep called?

It’s called a stinger. It’s supposed to prevent you from flopping forward when coming off a steep decline, but mainly it’s for looks.

How do I fix the death wobble on my Jeep TJ?

Begin by using a jack to lift one of your front wheels off the ground and place your hands on the top and bottom of the wheel. Try to wiggle the wheel from the top and bottom, if you feel movement, your wheel bearing is most likely worn out and should be replaced. Move to the other side and repeat this test.

What causes a track bar to go bad?

A telling sign that there is a problem with a front track bar is a front axle that moves laterally with the steering wheel. Why They Go Bad: Track bars can bend or break after suspension modifications or improper installation techniques.

What does a bad track bar look like?

Common signs include vibration in the steering wheel, loose driving condition, noises from the front end, and wobbling at higher speeds.

Can you drive without a track bar?

Safe to drive without a track bar? The short answer is No on a vehicle with coil springs. If it’s a YJ with a track bar and leaf springs (one of Jeep’s dumber ideas) then yeah, no problem. With an XJ or TJ suspension, it’s not safe to drive without a track bar.

Can you drive a Jeep without a front track bar?

Yep you won’t be able to steer without the track bar there to keep the axle from moving side-to-side instead of turning when you turn the steering wheel.

Is a sway bar the same as a track bar?

Sway bar tries to keep RV vertical (or perpendicular to road. Track Bar prevents lateral movement (Side to side) what usually happens without them is the front swings a bit right while the rear goes left thus you are now looking to the SIDE of the direction of travel..

Can you drive a Jeep without a rear track bar?

Your Jeep is definitely not OK without a trackbar. No it is not safe.

Can you drive without a rear track bar?

Without the track bar, the four link arms will bend and the axle will move sideways till one inner tire is rubbing the frame. It isn’t that it is a bad idea to drive without it, it just won’t work.

Does a Jeep TJ need a rear track bar?

Yes it is needed for a stock suspension. It locates (left to right) the axle underneath the Jeep. A tri-link or triangulated 4 link suspension is the only way to get rid of it.

Should I remove my Jeep YJ track bar?

Even on fireroads and easy trails there would be no benefit to removing them. I did notice it ride a little smoother when I removed mine too. The smoother ride is a benefit. Onroad or offroad, the Jeep will ride better with them removed.

How do I remove a track bar?

Part 1 of 2: Jacking and supporting the vehicle.

1. Materials Needed.
2. Step 1: Jack the vehicle up.
3. Step 2: Support the vehicle with jack stands.
4. Step 1: Remove the bolt on the frame mount end.
5. Step 2: Remove the bolt on the swivel mount end.
6. Step 3: Remove the track bar.
7. Step 4: Install the chassis side of the track bar.