What is Lutron HomeWorks?
Lutron Fixture Solutions HomeWorks QS, designed for exclusive homes, seamlessly integrates the control of electric light and daylight, as well as integrates with audio visual and HVAC systems. And it does all of that while saving energy.
What is QS homework?
HomeWorks QS is a lighting control system by the leading brand in smart lighting technology: Lutron. The result is centralized control from one system that manages all of your lighting and shading and even integrates with other technology like smart thermostats, home audio systems, and more!
How do you get Lutron certified?
Complete program application and submit proof of invoice. Maintain a high level of homeowner satisfaction on all Lutron installations, and provide superior service. Maintain active engagement with Lutron by achieving annual program minimums. Maintain qualified staff for Lutron products you sell and service.
What is RadioRA?
radioRA 2 is a wireless total home control system. This energy-saving system gives you the ability to adjust the amount of daylight and electric light (using light controls and automated shades) as well as temperature in a single room or throughout your whole home.
What is Lutron lighting?
Lutron LED lighting control systems can use dynamic lighting, as well as dimming and daylight management; to either automatically or manually adjust the color of the LED light to create the perfect environment for any indoor space.
How do I program my Lutron RadioRA 2?
To set up a RadioRA® 2 system, components must be added to the Main Repeater. First, add Auxiliary Repeater(s)*; then add all other system devices. Press and hold the Add button on the Main Repeater for 3 seconds until the green Add LED begins to rapid-flash (ten times per second) and the Repeater beeps.
How do I install Lutron RA2?
Connect the Ethernet cable to the router and then plug this into a wall outlet. Tap a button to connect with the ‘main repeater’ of the RA2 system. Add your Lutron devices, following the on-screen instructions: here you can manage the room it will be located in, which lights will be dimmable and other control features.
How do I reset my Lutron RA2 dimmer?
Step 1: Quickly triple tap and hold any button on the keypad. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until all the status LEDs start to flash slowly (approximately once per second). The keypad has now been returned to Factory Default Settings.
Can’t connect to Lutron bridge?
1) Make sure your Lutron device is plugged directly to a LAN (local area network) port on your router using a network cable. There are typically 4 or 8 LAN ports on most boxes. Check the lights to make sure the cable isn’t loose or anything like that. If in doubt, try a different cable.
How do I reset my Lutron hub?
What if my Lutron devices won’t pair with my Hub? You may have to factory reset them first. To do so, just press the “on” button 3 times, holding on the third press until the unit begins to blink. Then release and press on the “on” button 3 more times.
How do I reset my Lutron power pack?
A Triple-tap the Toggle button “ u” on the PowPak Dimming Module with 0 –10 V and hold until the LED begins to flash slowly; release button. B Within 3 seconds of the start of flashing, triple-tap the same button again and the LEDs will flash rapidly indicating that the unit has been reset to factory defaults.
Does Lutron Vive work with Caseta?
Looks like the Caseta bridge does not support the Vive modules, so I would need to either remove them and add a Caseta supported switch, or buy the Vive bridge which I think is out of my price range and a little much for a home project. You are correct that you would need to change out the relay to work.
What is Lutron vive?
Vive by Lutron is a simple, scalable, wireless control that can be installed in a single space or throughout an entire campus. It’s designed to meet today’s energy codes, be used in new construction or retrofit situations, and meet your budgetary needs.
Who invented the first energy saving dimmer?
Joel Spira
Where is the IP address on Lutron bridge?
The Lutron Connect Bridge will be discovered and its current IP address and MAC address will be displayed on the left-side of the screen.
What is the range of Lutron Caseta?
thirty feet
How does Lutron smart bridge work?
It connects to your router via an Ethernet cable, and communicates with Lutron lighting controls and motorized window shades using Lutron’s proprietary Clear Connect wireless technology, which operates in the same spectrum as devices such as motion sensors, garage-door openers, and security keyfobs.
How do I connect my Lutron hub?
This is pretty easy. Just take the included power and ethernet cables and connect them to the hub. After that, plug the power into a free outlet and the ethernet into an open ethernet port on your router. From there, lights will begin to blink on the hub to let you know it’s ready for use.
Does Lutron Caseta need wifi?
The Caseta system requires internet for initial setup, and for syncing its time. Once it is set up, you can remove it from the internet, and the Scheduled Scenes will still occur as long as the bridge doesn’t lose power.
How many Lutron bridges do I need?
While the Lutron app can only connect to one Bridge at a time, any HomeKit app can connect to any amount of Bridges simultaneously. So while you will need the Lutron app to setup your devices, you do not need it to control your devices.
Does Lutron Caseta work without bridge?
Lutron Caseta wall switches, dimmers, and remotes can function properly without the Smart Bridge. To control your lights using either the Lutron app or a smart home assistant such as Alexa, you will need a working Smart Bridge.
What is the difference between Lutron Smart Bridge and Smart Bridge Pro?
In terms of shade control, both devices support the Serena shade control but the Smart Bridge pro offers more shade control options. If you want to get more advanced shades like the Sivoia QS Triathlon or Sivoia QS Wireless Shade then you should buy Pro because Smart Bridge doesn’t support it.
Do you need Lutron Smart Bridge?
What hardware is required from Lutron to use Alexa? You’ll need either a Lutron Smart Bridge or Smart Bridge PRO (any generation) and at least one Caséta Wireless dimmer or switch.
Can SmartThings control Lutron Caseta?
The Lutron Caseta In-Wall Dimming Switch. On the SmartThings front, you’ll be able to control your Lutron switches and shades alongside other compatible gadgets in the SmartThings app. That’ll let you use things like SmartThings-compatible motion detectors to trigger your Lutron gear.
What Smart Hub should I buy?
Samsung SmartThings Hub v3 The third-generation Samsung SmartThings hub is our top pick of all the best smart home hubs because it has both Zigbee and Z-Wave inside, so you can connect to hundreds of devices, more than most other hubs.
Is Lutron Caseta Z-Wave?
And, if you’re considering installing Lutron Caseta in your home, you may be wondering if it’s compatible with Z-wave or ZigBee so you can maintain all your smart devices with one hub. Lutron Caseta isn’t compatible with Z-Wave or ZigBee smart hubs because it operates on a different radio frequency.
Does brilliant work with Lutron?
Connect your Lutron smart lighting to Brilliant using SmartThings and control your smart lighting system. Brilliant can control and adjust intensity of your Lutron smart lighting directly through the Brilliant Control or mobile app.