What is multiplex control unit?

What is multiplex control unit?

The multiplex control system has ”wake-up” and ”sleep” functions to decrease parasitic draw on the battery when the ignition switch is OFF. In the sleep mode, the multiplex control unit stops functioning (communication and CPU control) when it is not necessary for the system to operate.

What is Micu Honda?

The MICU controls many systems related to the body controller area and security system. and also works as a gateway to the diagnose the other B-CAN connected ECUs with the HDS.

Where is the radio fuse on a 1998 Honda Accord?

Actually the fuse your looking for is in the passenger side fuse box (right side of the dashboard) #9 20A.

How do I test if my multimeter is working?

If you want to find out if your multimeter works at measuring current, you will first need to have a loaded circuit. You could have a battery connected to the resistance. Then, you should place the multimeter in the series to the circuit. If it shows a reading, it works.

How do you tell if a fuse is blown without a multimeter?

To test a fuse without multimeter, take a flashlight equipped with a flat battery. Unscrew the bulb and get the battery. Place the fuse of one of the battery “blades” and the base of the bulb on the other side of the fuse. Put the bulb pad in contact with the second “blade” of the battery.

How do I know if my thermal fuse is blown?

Touch the left multimeter lead to the left side of the thermal fuse; touch the right multimeter lead to the right side of the fuse. Keep an eye on the multimeter needle; a needle that fails to move indicates a blown thermal fuse.

How do you reset a multimeter?

How to Calibrate a Digital Multimeter

1. Set the multimeter to the highest resistance range by turning the dial to the highest “ohm” setting.
2. Touch the test probes of your digital multimeter together.
3. Press the calibration knob until the display reads “0” on the digital multimeter if you don’t see “0 ohms” initially.