What is the backspacing on a Jeep TJ?

What is the backspacing on a Jeep TJ?

If my calculations are correct then the new -19 should be perfect. The numbers you are using are offset numbers, not backspacing. They don’t mean anything to most people, FYI. Backspacing is the measurement in inches from the rear wheel mounting surface to a straightedge across the rear outside edge of the wheel…

What is the offset on Jeep wheels?

Even though the wheel itself is the same width, the offset will determine how far the wheel (and tire) will extend outside from the end of the axle. Meaning, the 3 inches of backspacing will allow the tire to be closer inboard (towards the vehicle). (the Offset can effect this measurement – see more below).

What is backspacing on Jeep?

Backspacing is a little bit easier to explain, it’s the measurement of the mounting face to the back edge of the wheel (inner lip). This measurement has a direct influence on whether or not the back of the wheel will make contact with the inner components of the Jeep (shocks, sway bar links, inner fenders, etc.).

What is rear wheel spacing?

Rear spacing or back spacing is the distance from the backside of the wheel mounting pad to the outside of the rim flange. Offset: The distance from the centerline of the wheel to the mounting surface of the wheel.

What offset should I get on my wheels?

As a general rule of thumb, most front wheel drive vehicles have a positive offset. If you want to put wider wheels on your vehicle than OEM, you generally need to reduce the offset. On the other hand, frequently you find rear wheel drive vehicles have a negative offset.

Do wheel spacers ruin wheel bearings?

Secondly, installing wheel spacers on a car increases the leverage on the wheel bearing. The larger the spacer, the larger the leverage becomes. This reduces the life of the wheel bearing as they are not made to take leverage forces and can therefore wear faster, increasing rolling resistance and power loss of the car.

How much does it cost to install a spacer lift?

The kit was $229 and the install cost was about $200. But after looking at how it’s done I should have saved the $200 and just done it myself. A spacer lift isn’t difficult to install as far as I know.

Can you Offroad with a spacer lift?

The spacers will give a harsher ride offroad. Also the rough street ride (potholes and such) will be harsher. Otherwise you’ll be fine until you realize you want a real/good upgrade.

Is a spacer lift a body lift?

Registered. Coil spring spacers go inbetween the spring and where it mounts so your actually getting additional clearance. The body lift raises the body up off the frame so you can have more tire clearance only.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top