What is the blue slot on motherboard?
it means that your motherboard only has the ability to recognize 64Gb of RAM.
What is the black slot on a motherboard?
PCI–Express: The latest rendition of the PCI standard is PCI-Express. PCI-Express slots are generally colored black or dark gray or sometimes even yellow. They also feature a variety of sizes. PCI-X: The PCI Extended standard was developed to improve on PCI, but as a standard PCI-Express superseded it.
What is the blue PCI slot?
– the two slots circled in blue are what ya gpu/gpu’s will be connected in/plugged in. – the two slots circled in green are the PCI slots, can be either a soundcard or a network card, or perhaps other devices.
Which RAM slots should I use?
In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.
What happens if you put RAM in wrong slots?
The worst that can happen is no boot if RAM is at wrong slots. But no damage of any kind either to RAM or motherboard.
Can I put RAM in any slot?
A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.
Which RAM slots to fill first?
Fill slot 0 (or 1) first, then the other slots sequentially as you add modules. If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first.
Is it bad to use all 4 RAM slots?
it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.
What happens if you put DDR4 in a DDR3 slot?
A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot. DDR4 normally runs at 1.2 volts, down from DDR3’s 1.5V. It doesn’t sound like much, and there are low voltage DDR3L modules as well as enthusiast DDR4 modules where voltages overlap, but the standard modules are 1.2V vs. 1.5V.
Should I use 2 or 4 RAM sticks?
So you should always install as many memory sticks as the amount of channels the memory controller inside the cpu has, or double the amount (but double that amount won’t give you more performance). For socket AM4, you have two memory channels. Threadripper has 4 memory channels, so you should install 4 sticks.
How many sticks of RAM do I need?
In general, we recommend at least 4GB of RAM and think that most users will do well with 8GB. Choose 16GB or more if you’re a power user, if you run today’s most demanding games and applications, or if you simply want to make sure you’re covered for any future needs.
Is it bad to mix Ram brands?
Mixing Ram Speeds You will be performing to the speed of the slower RAM and your motherboard will automatically underclock the faster one. Even so, there shouldn’t be any problems. Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes.
Is it better to have 2 4GB or 1 8GB?
How is it beneficial? Most systems make use of unbuffered RAM modules. Eventually, installing four sticks of 2GB RAM is always better than using two sticks of 4GB RAM or a single 8GB RAM module. In addition to being reliable, the increase in the number of sticks will make the system faster.