What is the bolt pattern on a Honda 420 Rancher?

What is the bolt pattern on a Honda 420 Rancher?

ITP Delta Steel Wheel – 12×7 – 2+5 Offset – 4/110 – Black , Bolt Pattern: 4/110, Rim Offset: 2+5, Wheel Rim Size: 12×7, Color: Black, Position: Front/Rear D12R511.

What is a Honda ATV bolt pattern?

Honda: All non-sport ATV’s and SxS’s are 4/110 with the exception of the Pioneer 1000 and Talon. They use 4/137 bolt pattern.

What is a 4 156 bolt pattern?

The 4 X 156 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (4) and the bolt circle measurement (156), the notional circle determined by the center position of the studs.

Do Polaris and Honda have the same bolt pattern?

The Polaris is uses a 4/156 pattern and the honda is a 4/110 bolt pattern.

What is a 5’2 offset?

The second number indicates the distance from the mounting plate to the outer bead. For example, a 5+2 offset means there is 5” from the back/inner bead to the mounting plate, 2” from the mounting plate to the outer bead.

Is a Offset Bad?

Too much negative offset (the wheel sits too far outwards from the car) can also contribute to poor handling due to additional stresses on the suspension components. The steering wheel can flick back in hard cornering causing unstable handling and a possible accident.

Does positive offset push wheels out?

Ironically a positive offset pulls the wheel in and a negative pushes it out. So as you can imagine the offset can influence a vehicle’s stance when combined with tire width. Offset and backspacing are important to know when choosing your wheels and tires as well as the fender flares to compliment them.

What is better negative or positive offset?

As a general rule of thumb, most front wheel drive vehicles have a positive offset. If you want to put wider wheels on your vehicle than OEM, you generally need to reduce the offset. On the other hand, frequently you find rear wheel drive vehicles have a negative offset.

How far do offset wheels stick out?

So if you put a +15mm offset wheel on the car, the wheel is likely to stick out about 1 inch. If you’ve ever noticed a lifted truck or a low rider with wheels sticking out, its because the offset of the rim is very low and in many cases so low that they are negative offsets.