What is the fuse on my battery cable?

What is the fuse on my battery cable?

The fuse is to protect circuits that are always hot (have power at all times) like the car radio. The circuit is unswitched so there must be protection if the wiring accidentally short circuits! Otherwise the wiring will melt in a short circuit because of intense heavy current and could cause a fire.

Can I put a fuse on the negative wire?

Putting the fuse on the negative wire protects only the equipment, fuse in positive lead protects the equipment and the voltage source. If the black wire gets skined and shorts to ground,. Always place the fuse as close to the source of power (battery, power jack, etc) as possible.

Does a fuse go on the positive or negative wire?

The fuses are placed in the positive lines from the battery and close to the battery. If a fault occurs on the line between the fuse and the load the fuse blows and current flow stops. A ground fault on the return line is unlikely to cause any problems as there is no significant voltage on it.

What happens when you put the wrong fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can a blown fuse stop my car from starting?

A blown fuse in the starter circuit could be the cause of a no-start problem. Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter.

How do you tell if a fuse is blown on a circuit breaker?

A blown fuse will have a broken metal line or cloudy appearance in its glass top. After you have located the fuse, be sure power is off to the entire house by pulling out the main fuse block. You will need to replace the blown fuse with a new one that is the same amperage.