What is the most dangerous way to turn around?
Three-Point Turns This is the most difficult and dangerous way to turn around. Use it only when the road or street is too narrow to make a U-turn and you cannot go around the block. Move to the far right edge and signal a left turn. Wait until traffic is clear in both directions.
What is the correct procedure to follow when leaving an automatic transmission vehicle from the street side?
Cards
| Term If leaving the car from the street side | Definition Walk around the rear of the car |
|---|---|
| Term In a vehicle with an automatic transmission, | Definition Always come to a full stop before shifting to another gear |
| Term What roadway markings are used to guide your driving path? | Definition Reflectors |
What are the three techniques you can use to maintain a safe path of travel?
What are the three techniques you can use to maintain a safe path of travel?…
- Maintain a hazard.
- Separate hazards.
- Compromise space.
What are the procedures to use when going through an uncontrolled railroad crossing?
Describe the procedure for crossing uncontrolled railroad tracks. Slow down and be prepared to stop, and look in both directions. Listen closely for train sounds and stop a good distance from the tracks before approaching. When going over tracks, increase your speed at least 20 mph.
What should you do when you approach an uncontrolled railroad crossing that does not have lights and OR gates?
You should always stop before railroad tracks if you hear or see a train approaching, whether or not the gates and lights are working. You must always stop if the railroad gates start to go down. Flashing red lights at a railroad crossing means you must stop.
What procedures should you follow at an uncontrolled intersection?
At an intersection without STOP or YIELD signs (uncontrolled intersection), slow down and prepare to stop. Yield to vehicles already in the intersection or entering it in front of you. Always yield to the car that arrived first.
Which car goes first at an uncontrolled intersection?
The first vehicle to stop at the intersection is also the first to enter it. If two or more drivers come to a stop at the same time, they yield to the driver on their right.
What does an uncontrolled intersection look like?
An uncontrolled intersection is a road intersection where no traffic lights, road markings or signs are used to indicate the right-of-way. They are found in either residential neighborhoods or in rural areas. While the intersection itself is unmarked, warning signs or lights may be present to alert drivers to it.
Who has the right of way in an uncontrolled intersection?
If you reach an uncontrolled intersection at close to the same time, the vehicle who actually reached the intersection last is the driver who must yield the right of way. If you reach the intersection at the same time, the driver on the left should yield the right of way.
What is the difference between a controlled and uncontrolled intersection?
Controlled Intersections An intersection is said to be “controlled” when access to the intersection is regulated by traffic signals or road signs, while access to an uncontrolled intersection is regulated only by the right-of-way rules.
What is the most difficult driving season?
Winter
What does the T intersection sign mean?
ends ahead
What are the three types of intersection?
The three basic types of intersections are the three-leg or T-intersection (with variations in the angle of approach), the four-leg inter- section, and the multi-leg intersection. Each intersection can vary greatly in scope, shape, use of channelization and other types of traffic control devices.
What does the yellow sign with 2 arrows mean?
Two Direction Arrow Traffic Sign Yield the right-of-way or stop before turning right or left. You cannot travel straight through the intersection and must turn either right or left. Other warning signs. Bump.
What does this sign mean no passing zone?
(a “no passing” zone). Passing areas are based on how far a driver can see ahead. They account for unseen hazards such as driveways, intersections, and other places where another vehicle may enter the road ahead. The no passing zone sign is meant to mark where drivers cannot safely pass.
What does a yellow arrow sign mean?
The yellow arrow signal warns that the related green movement is being terminated. A left-turn yellow arrow means that the protected turning period is ending. You can no longer make a protected left turn at the intersection.
What does yellow sign mean?
Yellow: Yellow signifies WARNING. Yellow traffic signs stand for slowing down, driving with caution, or a general warning. It may be yellow, or yellow-green with black wording or symbols. This sign warns you about hazards or possible hazards on or near the roadway. Blue: This color is also used for guide signs.
What are the 5 types of traffic signs?
Type of Road Traffic Signs and Their Relevance
- Type of Road Traffic Signs. Mandatory Signs. Cautionary Signs. Informative Signs.
- Rules and Regulations.
- Safe Driving.
What are basic traffic rules?
7 Most Important Traffic Rules to follow in India
- Do Not Drink and Drive.
- Always Own Valid Car Insurance Policy.
- Wear your seatbelt while Driving a Car.
- Riding a Two-Wheeler without a Helmet On.
- Using a Mobile Phone while Riding.
- Over Speeding.
- Jumping the Red Light.
How many classes of road signs exist?
A: Traffic signs are divided into three categories: regulatory, warning, and guide signs.
What are the basic road signs?
A white background indicates a regulatory sign; yellow conveys a general warning message; green shows permitted traffic movements or directional guidance; fluorescent yellow/green indicates pedestrian crossings and school zones; orange is used for warning and guidance in roadway work zones; coral is used for incident …
What are the 8 basic shapes of signs?
What are the meanings of the eight shapes of signs: octagon, triangle, vertical rectangle, pentagon, round, pennant, diamond, horizontal rectangle? Octagon -> Stop. Triangle -> Yield. Vertical Rectangle -> Regulatory.
What color are warnings?
yellow
Why are road signs green?
The green coloring on highway exit signs and directional signs will always be used when it’s simply necessary to inform the driver about an upcoming convenience. Like all the other cooler sign colors, green signs are meant to not be distracting, and to inform the driver rather than disturb or alert the person.
What color was stop signs originally?
Which color is not used in traffic rules?
Traffic Signal Rules in India
| Signals | Meanings |
|---|---|
| Red arrow | Red arrow suggests that the traffic signal should stop until the green arrow is on. A left or right turn is not allowed. |
| Flashing red light | Flashing red light also means stop. You can proceed if seeing no oncoming traffic. |
What color is a mileage sign?
The guide sign is a directional sign. Guide signs provide mileage and directional information to travelers. They are typically green signs with white writing but can come in other colors.