What is the police channel for scanners?
Police scanners allow you to pick up radio frequencies & listen to communication on those frequencies much like an FM radio allows you to listen to different channels by changing the dial from 93.7FM to 102.5FM.
What frequency is police band?
Public Safety Spectrum
| Frequency | MHz Available for Public Safety |
|---|---|
| 25-50 MHz (VHF Low Band) | 6.3 MHz |
| 150-174 MHz (VHF High Band) | 3.6 MHz [non-contiguous] |
| 220-222 (220 MHz band) | 0.1 MHz |
| 450-470 (UHF Band) | 3.7 MHz [non-contiguous] |
What UHF channel is police?
Channel 5 and 35: are the designated emergency channels, and are not to be used except in an emergency. To make an emergency call, switch your radio to Channel 5 with duplex on, if there is no response, try again with duplex off.
How do you program a realistic 10 channel scanner?
How to Program a Realistic Scanner
- Install fully charged batteries.
- Press the button marked “Manual” on the scanner keypad.
- Use the keypad to enter the channel number you want to program and press “Manual” again.
- Press the “./Clear” button to clear the screen and prepare for the new frequency.
How do you program a realistic Pro 2023 scanner?
To program a pro 2023 scanner, you first need to turn on the scanner by turning the volume button clockwise. Press ‘manual’, enter the channel number you want to program, and then press ‘manual’ and ‘program’. The channel number then flashes to indicate that you are programming the channel.
How do you program a realistic Pro 2028 scanner?
Press the “Program” key and then press “Limit.” Enter the lowest frequencies you want to scan. Press “Program” and “Limit” and enter the highest frequencies you want to scan. Press “Enter” to scan frequencies. Press “Monitor” to store the frequency or the up or down arrows to continue scanning.