What is Zener knee voltage?
The knee voltage for silicon diodes is about 0.7 volts, which is due to the properties of silicon when doped to form P-N junctions.
What is the value of Zener breakdown voltage?
The breakdown of zener diode voltage means that the zener diode starts working in the reverse bias condition. 5.6 v is a general value for zener diode breakdown voltage but this value can range from 1.2 volt to 200 volts.
How do you calculate zener knee current?
Izm is the maximum zener current the diode can handle without breaking. It is often found by dividing the power rating (Pz) by the breakdown voltage (Vz).
How do you calculate zener resistance?
- The zener resistance can be calculated…
- By the following process:
- Zener diode ZD is used to generate a regulated DC output.
- R = Vin – Vz / Iz.
- Where Vin is the input voltage, Vz output voltage and Iz current through the Zener In most circuits, Iz is kept as low as 5mA.
- So the value of R3 appears as.
Can I use a higher rated zener diode?
If the current through the zener exceeds beyond the maximum rated current of the device ,the heat loss at the junction of the diode will permanently damage the diode. The zener diodes are available in different voltage and wattage rating.
What is the minimum zener current?
2 Answers. The minimum current for reasonable regulation is Izk, but this parameter is not always shown in the datasheet. It is the current in the zener at the corner where it is just starting to break over.
What is the current in Zener diode?
Current : The current, IZM, of a Zener diode is the maximum current that can flow through a Zener diode at its rated voltage, VZ. Typically there is also a minimum current required for the operation of the diode….Zener diode specifications.
Zener Diode Voltage Values in E24 Range | ||
---|---|---|
4.3 | 4.7 | 5.1 |
5.6 | 6.2 | 6.8 |
7.5 | 8.2 | 9.1 |
How much voltage can a Zener diode handle?
Zener diode specifications Voltage Vz: The Zener voltage refers to the reverse breakdown voltage—2.4 V to about 200 V; can go up to 1 kV while the maximum for the surface-mounted device (SMD) is about 47 V).