What kind of oil does a 2002 Ford Explorer take?
Ford Explorer 2002, High Mileage™ MaxLife™ Technology SAE 5W-30 Synthetic Blend Motor Oil, by Valvoline®.
How much oil does a 2002 Ford Explorer take?
Capacity: 6 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
What kind of oil goes in a 2003 Ford Explorer?
The 2003 Ford Explorer uses Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oi in the 4.6L Engine, You can use an alternative oil as long as it has the same viscosity rating and meets Ford specification WSS-M2C153-H and is certified for gasoline engines by the API.
How many quarts of oil does a 2003 Ford Explorer Sport Trac take?
5 quarts
How do you reset the oil change light on a 2003 Ford Explorer?
How to reset change oil light
- Press “SETUP” to access the System Check function.
- Press and release “RESET” to display “OIL LIFE XX%”.
- Press and hold “RESET” for 2 seconds to display “IF NEW OIL HOLD RESET”.
- Press and hold “RESET” to display “OIL LIFE SET TO 100%”.
How much oil does a 2003 Ford Explorer take?
2003 Ford Explorer – Specs
| Vehicle Type | ||
|---|---|---|
| 4-door Sport Utility Vehicle | ||
| Oil Capacity with filter (quarts) | 5.0 | 6.0 |
| Coolant Capacity (quarts) | 16.3 | 18.6 |
| Transaxle | 12.7 | 12.7 |
How many quarts of oil does a Ford Explorer take?
Engine capacity: 4.6 l. Ford Explorer engine oil capacity liters: 5.7 liters or 6.0 quarts including the oil filter.
How much antifreeze does a 2002 Ford Explorer hold?
The Ford Explorer can hold up to 4 gallons of antifreeze. Replace coolant for the engine at 100,000 miles or ten years.
What kind of transmission fluid does a 2003 Ford Explorer Sport Trac take?
The recommended automatic transmission fluid for the 2003 Ford Explorer is conventional atF-F-TYPE.To change the transmission fluid You will want to first make sure the car is level on the ground and then pop the hood open.
How do you change the transmission fluid on a 2003 Ford Explorer?
To change the transmission fluid in a 2003 Ford Explorer raise the car with Ramps or a floor jack and support it with jack stands. Find the lower cover of the torque converter housing. Turn the torque converter until You find the drain plug. Place a drain pan beneath the drain hole, remove the plug and drain the fluid.
How do you check the transmission fluid on a 2002 Ford Explorer v6?
On your 2002 ford explorer v6 there is no way to check the transmission fluid, these are sealed transmissions that do not have a dipstick.
What kind of transmission fluid does a 2002 Ford Explorer Sport Trac take?
What type of transmission fluid does a 2002 Ford Explorer Sport Trac use? According to TSB 02-20-3 it takes Mercon V (5) and needs to be checked at the proper transmission temp(80-120f).