What kind of oil does a Ford Econoline van take?

What kind of oil does a Ford Econoline van take?

Engine Oil This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity. Capacity: 6 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.

What kind of oil does a 1997 Ford f150 take?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.

How much oil does a 1997 Ford f150 v6 take?

Capacity: 6 quarts. (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.

How much oil does a 4.2 liter engine take?

How many quarts of oil go in a 97 F150?

You will need 6 quarts of oil for all 4.6L engines and 1997 to 2003 model year 5.4L engines. 2004 to 2010 model year 5.4L engines require 7 quarts of engine oil.

Can I mix 5w20 and 5w30?

It is entirely safe and okay to mix 5W30 and 5W20. Whether you’re topping your 5W30 engine with 5W20 oil or vice versa, you are definitely not triggering any harm or potential damage to the engine’s core components. Yes, the oils may have different additives; hence, the difference in their weight rating.

Can I use 10w30 instead of 5w20?

Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.

Will 5w20 hurt a 10w30 engine?

Using 10W-30 engine oil in an engine designed for 5W-20 risks not getting the thicker oil thoroughly around the fine tolerance of the engine. Saying that, more than likely it really won’t make a lot of difference using either oil in either engine except to likely shorten overall engine life.

What oil can be used in place of SAE 30?

After you look at the API specifications you need to check the viscosities, in this case you need to use 5w-30 or 10w-30 oil as a substitute for the SAE 30. You need to keep the second number the same as your straight SAE 30, this is the viscosity of the oil at operating temperature. Yes; you can make use of it.

Can I use 5w30 instead of SAE 30 oil?

5w-30 is fine to use. It has the same flow rate as SAE30 at normal operating temps. The way oil works is, the first number is flow rate at ambient temp.

Can I use SAE 30 oil in my air compressor?

You may use a synthetic or mineral oil in your air compressor and have it operate perfectly. You should avoid oils with a detergent additive, these are common in motor oils. So specify a non-detergent oil. In terms of viscosity, you’ll want an SAE 30 or SAE 20 air compressor oil.