What oil does a Hyundai Santa Fe take?
Hyundai Santa Fe engine oil 5w-30.
Where is the TPMS reset button on a Hyundai Santa Fe?
You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Drive the car at 50 mph for about 10 minutes. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it.
How do you turn the service light off on a Hyundai Santa Fe?
2018-2020 Hyundai Santa Fe Service Required message Reset
- Turn the engine On.
- Press the MODE button to navigate USER SETTINGS.
- Then scroll down to SERVICE INTERVAL then press OK.
- Enable the SERVICE INTERVAL then scroll down to RESET then press OK.
- Then select YES then press OK to confirm the reset.
How do you reset the service light on a Hyundai Santa Fe?
If a service is due the display will show “Service required”. To reset this message, press the SELECT/RESET button (left pointing arrow) on the bottom right of the steering wheel for more than 1 second. The service interval will be reset to the default setting.
How do you reset the service light on a Hyundai?
How to Reset “Service Required” Light on the Hyundai Elantra
- Start the vehicle.
- Press and hold the “OK” or “RESET” button (varies by model) for 5 seconds.
- Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.
How often change oil Hyundai Santa Fe?
every 3,000-5,000 miles
How do you reset the oil life on a 2011 Hyundai Santa Fe?
To reset the oil level warning or maintenance light in your 2011 hyundai santa fe turn your ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.
How do you reset the check engine light on a 2013 Hyundai Santa Fe?
To reset the check engine light on the Hyundai Santa Fe you will need to either reset the battery by removing the positive and negative cables, or connect an OBD scanner and do it through there.