What section of SDS has exposure limits?

Section 8—Exposure controls/Personal protection: OSHA’s permissible exposure limits (PELs), threshold limit values (TLVs), appropriate engineering controls, and personal protective equipment (PPE).

What information does a safety data sheet SDS contain?

The SDS includes information such as the properties of each chemical; the physical, health, and environmental health hazards; protective measures; and safety precautions for handling, storing, and transporting the chemical.

Where are exposure limits found in MSDS?

Section 8 – Exposure controls/personal protection indicates the exposure limits, engineering controls, and personal protective equipment (PPE) measures that can be used to minimize worker exposure.

What must a MSDS contain?

What information is on the MSDS?

Product Information: product identifier (name), manufacturer and suppliers names, addresses, and emergency phone numbers.
Hazardous Ingredients.
Physical Data.
Fire or Explosion Hazard Data.

What are the 9 categories of MSDS?

SECTION 1 — PRODUCT IDENTIFICATION AND USE.
SECTION 2 — HAZARDOUS INGREDIENTS.
SECTION 3 — PHYSICAL DATA.
SECTION 4 — FIRE AND EXPLOSION DATA.
SECTION 5 — REACTIVITY DATA.
SECTION 6 — TOXICOLOGICAL PROPERTIES.
SECTION 7 — PREVENTIVE MEASURES.
SECTION 8 — FIRST AID MEASURES.

What is the difference between MSDS and SDS?

There is no difference between an MSDS and an SDS, as both are generic terms for safety data sheets. A GHS compliant safety data sheet is an SDS but not an MSDS. An SDS can be an MSDS, but an MSDS is not an SDS. And calling a document an SDS does not make it GHS compliant.

What is the new name for MSDS?

As a reminder, effective June 1, 2015, all Material Safety Data Sheets (MSDS) must be replaced with new Safety Data Sheets (SDS).

Why did they change from MSDS to SDS?

The switch from MSDS to SDS format is expected to increase your workplace safety and make it easier for your business to properly use, store, and dispose of the chemicals you use.

Do SDS have to be accessible to all staff?

OSHA’s Hazard Communication Standard (1910.1200) and Lab Safety Standard (1910.1450) both require that SDSs be readily accessible during each work shift to employees when they are in their work area(s).

How do you know if a chemical is required to have an SDS?

The pictogram on the label is determined by the chemical hazard classification. The simple fact to keep in mind is that if it is a hazardous chemical or product, a safety data sheet will be required. If it is a manufactured product, the odds of an SDS existing may be slim.

Where should I keep my SDS sheets?

SDS’s must be maintained on site (including electronic access methods). SDS’s must be readily accessible during each work shift to employees when they are in their work area(s).

What are five key things that an SDS tells you?

It provides information on:

Identification: for the product and supplier.
Hazards: physical (fire and reactivity) and health.
Prevention: steps you can take to work safely, reduce or prevent exposure, or in an emergency.
Response: appropriate responses in various situations (e.g., first-aid, fire, accidental release).

What are 3 things required on a workplace label?

In general, a workplace label will require the following information:

Product name (matching the SDS product name).
Safe handling precautions, may include pictograms or other supplier label information.
A reference to the SDS (if available).

What are the 4 major routes of entry hazardous materials?

There are four major routes by which a chemical may enter the body:

Inhalation (breathing)
Skin (or eye) contact.
Swallowing (ingestion or eating)
Injection.

What are the different types of hazards listed in an SDS?

GHS uses three hazard classes: Health Hazards, Physical Hazards and Environmental Hazards. These aren’t required by OSHA. Health hazards present dangers to human health (i.e. breathing or vision) while physical hazards cause damage to the body (like skin corrosion).

What are the 5 hazard categories?

There are many types of hazards – chemical, ergonomic, physical, and psychosocial, to name a few – which can cause harm or adverse effects in the workplace. Get resources on specific hazards and their control, including identification, risk assessment and inspections, to keep your workplace healthy and safe.

How can hazard and risk be controlled?

When we look at control measures we often refer to the hierarchy of control measures.

Eliminate the hazard.
Substitute the hazard with a lesser risk.
Isolate the hazard.
Use engineering controls.
Use administrative controls.
Use personal protective equipment.

What type of hazard can cause serious eye damage?

Corrosive to metals (Category 1) Skin corrosion/irritation – Skin corrosion (Category 1, 1A, 1B and 1C) Serious eye damage/eye irritation – Serious eye damage ( Category 1)

What are the 9 hazard symbols?

Hazard pictograms (symbols)

Explosive (Symbol: exploding bomb)
Flammable (Symbol: flame)
Oxidising (Symbol: flame over circle)
Corrosive (Symbol: corrosion)
Acute toxicity (Symbol: skull and crossbones)
Hazardous to the environment (Symbol: environment)

What are the 10 types of hazard?

Top 10 Most Common Hazards In The Workplace

Hazardous chemicals, which include the following: acids, caustic substances, disinfectants, glues, heavy metals (mercury, lead, aluminium), paint, pesticides, petroleum products, and solvents.
Ladders.
Scaffolding hazards.
Vehicle accidents.
Respiratory hazards.

What is an example of a chemical hazard?

Hazardous chemicals are substances that can cause adverse health effects such as poisoning, breathing problems, skin rashes, allergic reactions, allergic sensitisation, cancer, and other health problems from exposure. Examples of hazardous chemicals include: paints.

What is an example of an ergonomic hazard?

Ergonomic risk factors are workplace situations that cause wear and tear on the body and can cause injury. These include repetition, awkward posture, forceful motion, stationary position, direct pressure, vibration, extreme temperature, noise, and work stress.

What are the three different types of ergonomics?

According to the International Ergonomics Association, there are three broad domains of ergonomics: physical, cognitive, and organizational.

What are some examples of ergonomics?

Best Examples of Ergonomics in the Workplace

Find Your Natural Posture.
Adjusting Your Keyboard and Mouse.
Adjusting Your Screens.
Adjusting Your Chair.
Don’t Sit Around All Day – Stand Up and Move!

What are the types of ergonomics?

3 Dimensions Or Ergonomics

Physical Ergonomics. In physical ergonomics, it is mainly physiological interactions of people and their activities that are concerned.
Cognitive Ergonomics.
Organizational Ergonomics.