What size is a sump plug?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In addition, sockets are available in various shapes to fit the different bolt heads: six points (hexagon), eight points (double square), and 12 points (double hexagon).
Are all sump plugs the same size?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size is the oil drain plug washer?
What is the size of the washer? The oil drain plug is 17mm, but the only sizes of the washer available to buy online are 12mm, 14mm, and 20mm.
How do I know what size socket I need?
How to Determine the Right Size Socket for a Nut
- Turn on the digital caliper and set it to read in inches, not millimeters.
- Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
- Check the caliper display.
- Turn on the digital caliper and set it to read in millimeters, not inches.
What is the standard socket drive size?
Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.
What is a standard socket size?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
What are the standard socket sizes smallest to largest?
Metric Socket Sizes Chart
| 1/4” Drive | 3/8” Drive | 1/2” Drive |
|---|---|---|
| 6mm | 9mm | 12mm |
| 7mm | 10mm | 13mm |
| 8mm | 11mm | 14mm |
| 9mm | 12mm | 15mm |
What is bigger than a 1/2 inch socket?
Society of Automotive Engineers (SAE) measurement 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in, 13/16 in, 7/8 in, 15/16 in, 1 in, 1-1/16 in, 1-1/8 in, 1-3/16 in, 1-1/4 in.
Is a 3/8 socket the same as a 10mm?
The equivalent imperial size of a 10mm socket is a 3/8 socket.
What is the most common socket drive size?
Drive Size
- ½-inch drive size sockets are for high-torque applications like automotive wheel replacement and when you are using a breaker bar.
- ⅜-inch drive size sockets are the most common and most available.
- ¼-inch drive size sockets are ideal when you are in tight spaces or when you are working with recessed nuts.
What are the 3 most common socket drive sizes?
Common ratchet sizes include 1/4-inch drive, 1/2-inch drive and 3/8-inch drive. Having different socket wrench sizes will allow you to operate different socket sizes based on your particular needs. Most ratchets use a geared drive.
Are 6 or 12 point sockets better?
Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.
How do socket sizes work?
Socket sets come in a wide range of sizes in both metric and imperial types, for tackling most types and gauges of fastener. The size of the socket head (the part that fits over or into a fastener). Usually, the smaller the drive socket size is, the smaller the socket head size will be, and vice versa.
What is the best size socket set to buy?
A ⅜” drive ratchet and socket set will be the most versatile and suitable in most applications. If you intend on doing a lot of work on small or very large items, then you should purchase a socket set with a drive size more suitable to that size of work.
How do I figure out my wrench size?
Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.
What size socket do I need for a spark plug?
Most spark plugs require a 5/8″ (16mm) size spark plug socket.