What size is the axle nut on a 98 Honda Accord?

What size is the axle nut on a 98 Honda Accord?

36mm is the number.

What size is the axle nut on a 99 Honda Accord?

Front spindle nut part # 90305-SD4-003 should be a hex size of 36mm.

Can you reuse a prevailing torque nut?

The nuts spin freely until their distorted top threads engage the threads of the mating part. Prevailing torque lock nuts are reusable a limited number of times because the prevailing torque declines each time the nut is used.

How many times can you use a Nylock nut?

– a nylock nut can only be used once and the nylon insert no longer performs its function to 100% of design .. therefore nylock nuts should be discarded and replaced after each use, or re torque.

Do Nylock nuts need to be torqued?

Nylock adds a secondary retention to the nut. The primary is torque. If the material is a grade 5 nut as others have suggested then use correct torque for the material. The Nylock is to resist loosening from high vibration environment that could loosen a nut with only torque load.

How do you fasten a Nylock nut?

1. Examine the nylon insert of the nylon lock nut to ensure that the insert is not damaged.
2. Thread the nylon lock nut onto the bolt or threaded stud and turn the nut clockwise with your hand until it no longer turns.
3. Place the socket that matches the nylon lock nut onto the 3/8-inch drive ratchet.

Can a locking nut be removed?

Lock nuts can be very difficult to remove. A lock nut will not loosen, even under intense vibrations. They are different on each side, making them very difficult to get off. There may come a time when you need your lock nut removed; this task could require some patience.

Do Nylock nuts need washers?

RE: Lock washers with nylock type nuts? Thread adhesive (such as Loctite) is not really recommended for use-reuse applications. If you need to use a washer, use a hardened flat washer. To prevent nut rotation, you can use two nuts, but the technique necessary to prevent problems is complicated.