What size screws go in the back of a Samsung TV?
You can also purchase wall mounting screws from Samsung Parts and there is always a universal TV mounting screw kit available as well. For TVs 19 – 22 inches, the screw size is M4. For TVs 30 – 40 inches, the screw size is M6. For TVs 43 – 88 inches, the screw size is M8.
What size is M8?
Metric clearance and tapping drill hole sizes.
| Size | Clearance Hole mm | Tapping Drill (std Pitch) |
|---|---|---|
| M6 | 6.5 | 5.0 mm |
| M8 | 9 | 6.75 mm |
| M10 | 11 | 8.5 mm |
| M12 | 14 | 10.25 mm |
How many inches are 6mm?
1/4 inch
How can you tell the size of a screw?
To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.
How do I know what drill bit to use?
How to Choose Drill Bits by Size
- Use a bit 1/64” smaller than the target hole size for softwoods.
- Use a bit exactly the same size as the hole when working on other materials.
- If you’re not sure which to select, choose a drill bit 1/64” larger than the hole you wish to create.
Do you drill pilot holes all the way through?
Begin by understanding this: the hole drilled through the top piece of wood isn’t a pilot hole at all — it’s a clearance hole. This hole completely clears the material, allowing the screw to pass through, without cutting into the wood. Then, drill a pilot hole in the bottom piece to accept the screw’s threads.
How do I know what size Rawlplug to use?
As a general rule:
- Yellow plugs fit into 5.0 mm holes and work best with screw sizes 3 and 4, but can be used for screw sizes 3 through 8.
- Red plugs fit into 6.0 mm holes and work best with screw sizes 6 and 8, but can be used for screw sizes 6 through 10.
What do different color drill bits mean?
The black or blue-gray color on metal boring bits comes from a coating or black oxide or titanium carbo-nitride, designed to reduce friction and extend bit life. Some metal-boring bits are gold — which is the color of a protective coating of titanium nitride.
Can I use a wood drill bit on aluminum?
High-speed steel (HSS) drill bits can drill wood, fiberglass, polyvinyl chloride (PVC) and soft metals such as aluminum. Carbide-tipped drill bits stay sharp much longer than steel, HSS or titanium bits.
How do you drill a hole in wood without splinters?
You can drill a hole in wood without splintering by using sharp and well-maintained drill bits, drilling a hole at higher speeds, avoiding putting pressure on the drill & letting the bit find its way through the wood. To avoid wood splintering, use another wooden board at the bottom that you let drill in.