What size socket do I need for brake pads?

What size socket do I need for brake pads?

Hand Tools You at least need a set of 3/8″ (drive size) sockets set with sizes 8-19mm. Some vehicles use Allen or Torx bits for the caliper guide pins.

What tools do I need to change rotors and brake pads?

What Tools Do You Need To Change Brake Pads and Rotors?

1. Ratchet and Socket Kit. To fix your vehicle, you must have a socket set.
2. Torque Wrench. A torque wrench is a must.
3. Brake Pad Spreader or C-Clamp.
4. Torx / Allen Set.
5. Brake Bleeder Wrench.
6. Jack and Jack stands.
7. Lug Nut Wrench.
8. Gloves.

Can I put dot 3 in a DOT 4 system?

Are DOT 3 and DOT 4 brake fluid compatible? Yes, DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point.

What happens when you mix DOT 4 and 5?

Since DOT 4 and 5.1 are both glycol-based brake fluids they are compatible with each other, which means they can be readily mixed without harming your brake system. Many riders with DOT 4 in their brakes will opt to bleed with DOT 5.1 to benefit from the higher boiling point and improved heat resistance.

Is DOT 5.1 better than dot4?

As DOT 5.1 is more hygroscopic than DOT 4 and therefore absorbs more moisture, it will need to be changed more often. However, the benefit of 5.1 with its higher boiling point, is that it can experience higher temperatures than DOT 4 before it starts to affect braking efficiency.

Can DOT 4 and 5.1 be mixed?

Yes, brake fluids conforming to DOT 3, Dot 4 and DOT 5.1 can safely be mixed although the performance of the higher specifica on products will be diluted. Silicone (DOT 5) and mineral-based brake fluids should never be mixed with any other types.

Can DOT 5.1 replace dot 3?

All DOT 3, 4 and 5.1 brake fluids are compatible with each other and with all systems. All polyethylene glycol-based fluids will not harm healthy rubber parts. If you have an older vehicle and are worried about boiling the fluid, use DOT 4 or 5.1 brake fluid.

What happens when you mix dot3 and dot4?

You can mix both, however the result will be in two ways as follows; Dot 3 has a lower boiling point compared to Dot 4 so the result of mixing Dot 3 to Dot 4 will be a lower boiling point, and mixing Dot 4 to dot 3 will only increase the boiling point if you have a very high ratio of Dot 4.