What size wrench is equal to 17mm?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 17mm | 0.669 | |
| 11/16″ | 0.688 | |
| 18mm | 0.709 | |
| 23/32″ | 0.719 |
What is the same as a 17mm socket?
17mm = almost 11/16 inch….What is bigger 11/16 or 17mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
| 17mm | Just short of 11/16 Inch | 0.66929 Inches |
| 18mm | Just short of 3/4 Inch | 0.70866 Inches |
Is 17mm the same as 1 2?
11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) 13mm = just over 1/2 inch. 17mm = almost 11/16 inch.
What is 17mm in fraction?
| Decimal | Fraction | Metric |
|---|---|---|
| 0.0787 | 15 mm | |
| 0.0938 | 3/32 | 15.875 mm |
| 0.1181 | 16 mm | |
| 0.1250 | 1/8 | 17 mm |
What is 20mm in fraction?
Millimeters to inches conversion table
| Millimeters (mm) | Inches (“) (decimal) | Inches (“) (fraction) |
|---|---|---|
| 20 mm | 0.7874 ″ | 25/32 ″ |
| 30 mm | 1.1811 ″ | 1 3/16 ″ |
| 40 mm | 1.5784 ″ | 1 37/64 ″ |
| 50 mm | 1.9685 ″ | 1 31/32 ″ |
What is bigger 3/8ths or 1 2?
Therefore, 3/8 is not greater than 1/2 and the answer to the question “Is 3/8 greater than 1/2?” is no. Note: When comparing fractions such as 3/8 and 1/2, you could also convert the fractions (if necessary) so they have the same denominator and then compare which numerator is larger.
What size is bigger than 3 8?
| Fraction Conversion Table | ||
|---|---|---|
| Fraction | Decimal | Millimeters |
| 23/64 | 0.359375 | 9.128 |
| 3/8 | 0.375 | 9.525 |
| 25/64 | 0.390625 | 9.921 |
What’s bigger 3/8 or quarter inch?
Answer: 3/8 is bigger than 1/4 It is very clear that the value of 3/8 is more than 1/4.
What is 3 100 as a decimal?
3/100 as a decimal is 0.03.
What is 2 over 3 as a decimal?
1.5
What is 4/3 as a decimal?
How to Write 4/3 as a Decimal?
| Fraction | Decimal | Percentage |
|---|---|---|
| 4/3 | 1.3333 | 133.33% |
| 4/2 | 2 | 200% |
| 4/4 | 1 | 100% |
| 4/5 | 0.8 | 80% |
What is the decimal form of 1 by 3?
0.3333
What is 1/3 as a decimal rounded to 2 decimal places?
I ideally believe in significant figures, so I would rather write it down as 0.3 . Most people will write it down as 0.33,0.333,0.3333 , etc. In practice use 13 as 0.333 or 0.33 , depending on the level of accuracy required.
What does 2 decimal places look like?
Rounding to a certain number of decimal places 4.737 rounded to 2 decimal places would be 4.74 (because it would be closer to 4.74). 4.735 is halfway between 4.73 and 4.74, so it is rounded up: 4.735 rounded to 2 decimal places is 4.74.
What does 3 decimal places mean?
“Three decimal places” is the same as “the nearest thousandth.” So, for example, if you are asked to round 3.264 to two decimal places it means the same as if your are asked to round 3.264 to the nearest hundredth.
How do you round to 3 decimal places?
Example
- Round this number to 3 decimal places.
- Count along the first 3 numbers to the right of the decimal point.
- Count along the first 3 numbers to the right of the decimal point.
- Count along the first 3 numbers to the right of the decimal point.
- Look at the next number (the 4th number after the decimal place)