Where are the fuses in a 2003 Dodge Caravan?

Where are the fuses in a 2003 Dodge Caravan?

The interior fuse panel in a 2003 Dodge Grand Caravan can be found under the dash on the driver’s side. It is near the pedal boxAnd can be found behind a plastic access panel.

Can I use a 10amp fuse in a 15 amp?

Yes, the 15 Amp fuse may be sized for a device in that particular circuit, and the 10 Amp fuse may be very short lived.

Can I put 30 amp fuse in 15 amp?

In fact, a 20 or 30 Amp fuse or breaker on a 15 Amp circuit becomes an armed fuse of a ticking fire bomb! The 15 Amp fuse blows. You replace it with another 15 Amp one. It blows again and again.

Can I replace a 10amp fuse with a 13 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it.

How much current can a 13 amp fuse take?

Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown). For example: 13A Fuse – Washing machine, dishwasher, microwave, kettle, toaster, iron.

Can I use a 5 amp fuse instead of a 13 amp?

If your circuit is rated at 13 Amps or higher then you can replace the 5 amp fuse with a 13 amp fuse. You certainly can and if there is a reason that the 5 amp fuse blew, you will turn the item that the fuse is designed to protect into a melted mess and all the magic blue smoke will escape.

Is it OK to use a lower amp fuse?

Do not use a fuse with a lower rating– don’t put a 20 amp fues in a 30 amp circuit–because it probably will blow prematurely. Conversely replacing a 20-amp fuse with one rated at 30 amps is dangerous because it may not blow soon enough and damage an electrical component or start a wiring fire.

Can I replace a 1 amp fuse with a 3 amp fuse?

The correct fuse and repairing the fault is cheaper overall. If you replace a fuse with a higher amp one it will work but create an unsafe circuit. It could cause a failure of the device burn it up, start a fire. The fuse is designed as a safety device.