Where doors or gates open directly on a stairway?
Where doors or gates open directly onto a stairway, a platform must be provided that is at least 20 inches (51 cm) in width beyond the swing of the door. Metal pan landings and metal pan treads must be secured in place before filling. All stairway parts must be free of dangerous projections such as protruding nails.
Where doors or gates open directly on a stairway quizlet?
In those places where doors or gates open directly to a stairway, a platform must be provided that is at least 20 inches in width beyond the swing of the door.
When stairways have two open sides then stair rails need to be used on at least one side?
(ii) On stairways less than 44 inches wide having one side open, at least one stair railing on open side. (iii) On stairways less than 44 inches wide having both sides open, one stair railing on each side.
Which of the following must be provided when the length of climb of a fixed ladder exceeds 24 feet?
If the total length of the climb on a fixed ladder equals or exceeds 24 feet (7.3 m), the following requirements must be met: fixed ladders must be equipped with either (a) ladder safety devices; (b) self-retracting lifelines and rest platforms at intervals not to exceed 150 feet (45.7 m); or (c) a cage or well, and …
Do ladders expire?
Remember that there is no expiration date for ladders, so as long as you follow proper storage techniques and treat it with care, your ladder could last you an extremely long time.
Can ladders be stored standing up?
When storing portable step ladders, make sure they are folded shut and secured in an upright position so they do not sag or twist. Portable extension ladders should be stored so they will remain flat and evenly supported. Do not use a stored ladder to hang tools and equipment.
Is ladder training a legal requirement?
No, you do not. You need to be competent. This means having the necessary skills, knowledge and experience to use a ladder properly for the work you will carry out, or, if you are being trained, you work under the supervision of somebody who can perform the task competently.
Which devices are used to break a fall from heights?
Examples of these systems are: ladders, scaffolds, elevating work platforms, vehicle-mounted aerial devices, suspended access equipment (swing stage), boatswain’s chairs and mast- climbing work platforms.
What is a fall restricting system?
A fall restricting system is designed to limit a worker’s free-fall distance to 0.6 m (2 ft). This means that less force will be exerted on the body when the fall is arrested. It also means there is less chance that the person will hit the ground or an object below.
What is a valid fall protection method?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
Who is responsible for fall protection?
Building owners are responsible for fall protection if they hire someone to work at height. This happens more often than you’d think. The frequency of cleaning, maintenance and repair work at height is often underestimated. As the owner of a building, you are responsible for the work that is done on your building.
Which of the following is an example of Primary fall protection?
Guard rails are typical primary fall arrest devices as they are installed in such a way as to ensure that the falling edge is inaccessible and that anyone walking over a roof surface, for example, can move about freely within the secured zone.