Where is the fuse box on a 07 Jeep Compass?

Where is the fuse box on a 07 Jeep Compass?

Fuse box location An Integrated Power Module is located in the engine compartment near the air cleaner assembly.

Where’s the fuse box on a Jeep Compass?

Power Distribution Unit The engine compartment fuse box is located on the left side of the engine compartment.

Can you put a 13A fuse in a 3a?

Don’t put the 13a fuse in place of the 3a fuse, the fuse blew for a reason.

Can I put a 30 amp fuse in a 20 amp slot?

While it may be physically and functionally possible to install said 30 amp breaker in place of a 20 amp breaker, it’s a pretty bad idea. If the load needs that much more current, you can replace the breaker, but you must also replace all the wire going from the breaker to that load and back.

Is 30 amp service enough?

The key to living on 30 amps is to not exceed the amperage of an individual circuit, and to not exceed a total of 30 amps at any given time. With a better understanding of your RV’s electrical system and some simple electrical formulas you can live comfortably on 30 amps with little to no problems.

How many outlets can be on a 30 amp circuit?

The NEC states that you can only have 30-amp receptacles on a 30-amp circuit. If it’s a multi-outlet circuit, you can have a 20-amp breaker protecting the #10 conductors and use 15 and 20amp receptacles on the circuit.

Can you use 12 gauge wire on a 30 amp breaker?

A 30-amp breaker does not operate safely with a 12-gauge wire. The minimum wire size that is allowable for use with a 30-amp breaker is 10 gauge. A smaller gauge of wire indicates a larger diameter and the ability to carry more current safely. Twelve-gauge wire is acceptable with 20-amp or smaller circuit breakers.

How many outlets and lights can be on a 20-amp circuit?

10 receptacles

How many outlets can you have on a 20-amp circuit?

A rule of thumb is to factor a maximum draw of 1.5 amps to each receptacle, which means you can put 10 outlets on a 20-amp circuit.