Where is the fuse box on a 2002 Grand Am?

Where is the fuse box on a 2002 Grand Am?

Fuse box location There are two fuse blocks, which are located on the right and left in the dashboard, behind the covers.

How do you reset the service engine soon light on a 2002 Pontiac Grand Am?

How to Reset the Service Engine Soon Light on a Grand Am

1. Turn the ignition switch on without starting the engine.
2. Press the “Options” button on the instrument panel until the service light is displayed.
3. Press the “Set/Reset” button to open the reset confirmation screen. Turn the ignition switch off.

Where is the fuse box in a 2002 Pontiac Grand Prix?

Instrument Panel Fuse Block Fuse box is locate on the end of the instrument panel on the passenger side.

What does the service engine soon light mean on a 2002 Pontiac Grand Am?

Service engine soon means there is a problem with the emissions system. Usually it just means the gas cap isn’t on correctly, but it could be a bigger problem.

How do you turn the service car soon light off?

Cycle ignition switch to ON position and wait 1 minute, then start your vehicle. Check Engine Light or Service Engine Soon Light should be reset and turned OFF.

Can I drive my car if the service engine soon light is on?

That having been said, you can probably drive safely with the service engine soon light on, as long as it is on solid and not flashing. If the service engine light is flashing, you should pull over immediately and call for roadside service and have the vehicle towed to the mechanic.

Is there a difference between check engine and service engine soon?

The “Check Engine” light is a notification that something is wrong, the range can be anything from a loose gas cap to a faulty ignition coil. The “Service Engine Soon” light indicates that your vehicle is due for its next service maintenance.

Can service engine soon mean oil change?

A Service Engine Soon light will appear when your cars onboard diagnostic system (the ECM) detects a potential problem. Its purpose is to alert you of any minor issues before they become major concerns. Common causes include needing an oil change, or a new cabin filter or air filter.

How serious is a service engine soon light?

Check Engine Light/Service Engine Soon The check engine and service engine soon lights are an indication that something is wrong. The icon you see will vary depending on the model of your vehicle. It can be as simple as a loose gas cap, but it can also mean something serious like an issue with the fuel system.

Does AutoZone check service engine soon light?

Does AutoZone Scan Check Engine Lights? AutoZone does. If your light is on, and you are wondering why, head down to your local AutoZone where one of our store associates can help diagnose the issue through our free Fix Finder service.

Will a service engine soon light fail inspection?

The vehicle’s on-board diagnostic system reports a failure or problem with an emissions related component or sensor. If there is a problem, the “Check Engine” or “Service Engine Soon” light may be on. If the light is on when you come in for inspection, the vehicle will fail the test.

How many miles should I drive after resetting check engine light?

30 to 100 miles

Will maintenance light affect smog?

Get Rid of Your Check Engine Light If your check engine light is on, you’ll automatically fail your smog test. In the State of California, your auto mechanic cannot refuse to test your car if they see the light on.

Should I change my oil before smog?

Dirty oil can greatly affect smog test results, because the fumes from the oil compartment emanate throughout the engine area and become a part of the engine’s combustion. Remember to change the oil before getting a smog check.

What prevents a car from passing smog?

Any roughness in the performance of the engine will have an impact on the results of your smog test. Also, if your car smokes or over-heats, you may not pass the smog inspection. Smoke from the tailpipe and a hot running engine create high levels of harmful emissions. Be sure that your gas cap fits properly.

How can I turn off my check engine light to pass emissions?

By the way the easiest way to turn off the check engine light would be to disconnect the battery for 30 seconds. Inorder to pass inspection your car needs to complete a full drive cycle so that all (8) internal monitors have a status of “Ready”.

Does disconnecting battery erase codes?

Leaving the battery disconnected for about 15 minutes will ensure the vehicle systems will completely reset when you reconnect the battery. Disconnecting the battery will clear the error codes and reset the check engine light.