Where is the fuse for my dashboard lights?

Where is the fuse for my dashboard lights?

Find the fuse that powers your dashboard lights. Check under the hood, under the dashboard, or near or in the glove compartment. Once you find the fuse box or boxes, remove the lid and check the diagram on the underside of the lid for a fuse labeled “dash lights” or just “lights.”

Why does my dash light not work?

If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.

How do you fix dash lights?

How to Repair Dashboard Lights

1. Step 2: Adjust the dimmer switch.
2. Step 1: Locate the fuse for the dashboard lights.
3. Step 2: Remove and inspect the fuse.
4. Step 1: Remove the trim around the gauge cluster.
5. Step 2: Remove the fasteners.
6. Step 3: Remove the gauge cluster.
7. Step 4: Remove the bulb socket.

Where is the fuse box on a 2004 Pontiac Grand Am?

Passenger Compartment Fuse Boxes There are two fuse blocks, which are located on the right and left in the dashboard, behind the covers.

How do you fix a lighter that won’t spark?

My Lighter Hisses But Won’t Light

1. Make sure that there is no debris, dirt or lint clogging or blocking the lighter’s operation. Even a small amount of debris can stop a lighter from functioning correctly.
2. Check the flame adjustment of your lighter.
3. Check the flame height on your lighter.

Why is my Bic lighter not working?

Check the fuel level. If the lighter doesn’t light, check to make sure that there is fuel in the tank. If the lighter is out of fuel, throw it away. Disposable lighters are not meant to be refilled. You should be able to get up to 3,000 lights from a full-sized Bic lighter.

Why is my lighter not working after refilling?

After 3 or 4 refills, the tank is overwhelmed with an air pocket, or bubble. This air prevents fuel from occupying the tank. Let the lighter warm up in your hand or pocket before you attempt to light it. Adjust the flame height back to the desired setting and fire away.

Why is my Bernzomatic torch not working?

There could be a blockage in the valve. This could be caused by a piece of debris, or the valve could be frozen due to the endothermic reaction mentioned above. Clean or thaw the valve to fix. The valve on the tank it self could be blocked/frozen, but this is unlikely as you tried an alternate tank.

How do you unblock a lighter?

Press the plastic nozzle extension tube attached to a can of compressed air against the lighter gas outlet valve. Hold the canister plunger down for one or two seconds. Move the extension tube back an inch or two to blow remaining residue from the lighter recess.