Where is the thermostat on a 1993 Ford f150?

Where is the thermostat on a 1993 Ford f150?

The gasoline-powered 5.0L and 5.8L engine thermostat is mounted vertically on the front of engine, the 7.5L engine thermostat is positioned vertically. Drain the cooling system below the level of the coolant outlet housing.

How much is a thermostat for a Ford f150?

The average cost for a Ford F-150 thermostat replacement is between $178 and $200. Labor costs are estimated between $83 and $105 while parts are priced at $95.

How do you change a thermostat on a Ford f150?

1. Step 1 – Drain your coolant.
2. Step 2 – Remove the intake piping.
3. Step 3 – Remove the upper radiator hose on the thermostat housing.
4. Step 4 – Remove the thermostat housing.
5. Step 5 – Replace the thermostat.
6. Step 6 – Put it all back together.

Where does the O ring go on a thermostat?

Oring is to seal between housing and thermostat not thermostat and engine block. Also, most thermostats have a small purge hole/opening near the edge, this purge hole/opening needs to be at the top so that any air in the system can bleed through it to remove air bubbles in the cooling system.

Does the O ring go on top of the thermostat?

Thermostat goes in first, then o-ring seal. The end of the thermostat housing is tapered to make the seal with the o-ring.

How much is a thermostat gasket?

It will cost you about $1,000 to have the thermostat gasket replaced, and the labor and parts costs will depend on which mechanic you choose and how many parts need to be replaced.

Why is my thermostat leaking?

It could be a thermostat gasket leaking if it is coming from the thermostat location. The leaking hose will need to be replaced if the leak is coming from one of the hoses. A cooling system pressure test can reveal the leak location.

Is there a gasket for the thermostat?

Controlled by a bi-metal sensing element and a spring, the thermostat can jam or freeze up, causing excessive internal pressure which blows through the thermostat housing gasket. Replacing the thermostat housing gasket requires only a few basic tools and simple steps.

What goes first thermostat or gasket?

Gasket goes on after the thermostat.

What should I put on my thermostat gasket?

Wipe oil, water, and foreign material from thermostat mounting surface on engine and thermostat housing. REMOVE WHITE B ACKING PAPER ON GASKET TO EXPOSE ADHESIVE. 2. Place thermostat into engine block or water outlet housing, whichever contains the shallow recess (counterbore).

Does thermostat gasket go on top or bottom?

it goes in the thermostat housing on the lower intake directly to the left of the distributor. There’s 2 bolts holding on the housing where the upper radiator tube goes into the lower intake.

Do you need to drain coolant to change thermostat?

With a normal top-mounted thermostat you need drain only part of the cooling system . Do not drain it while the engine is hot — you may be scalded. Drain the coolant from the radiator tap, or from the bottom hose, until it is below the level of the thermostat housing.