Which devices can be used for the purpose of lockout?
Lockout device: Any device that uses positive means, such as a lock, blank flanges and bolted slip blinds, to hold an energy-isolating device in a safe position, thereby preventing the energizing of machinery or equipment.
What are double block and bleed valves used for?
Double Block and Bleed valves for pressure connections are generally used to isolate instrumentation such as pressure indicators and lever gauges. Double Block and Bleed valves for process isolation are located in the primary process stream.
Is double block and bleed positive isolation?
A double block and bleed is often used for a more positive isolation of a process fluid from other equipment. It normally consists of two block valves (Valves 1 and 2 in the pictures) and a bleed valve (Valve 3) to a safe location, consistent with local environmental regulations.
Which blocking method is used on electrical devices that can store electricity after being shut off?
A lockout/tag out program will help prevent: Contact with a hazard while performing tasks that require the removal, by-passing, or deactivation of safe guarding devices. The unintended release of hazardous energy (stored energy).
Who can remove a lock out/tag out?
Lockout or tagout device removal: Each lockout or tagout device must be removed from the energy-isolating device by the employee who applied the device [29 CFR 1910.147(e)(3)].
What Loto means?
LOTO
| Acronym | Definition |
|---|---|
| LOTO | Laughing on the Outside |
| LOTO | Lock Out Tag Out (safety) |
| LOTO | Landscape Opportunities for Territorial Organization (Italy) |
| LOTO | Lemmings of the Outback (online gaming community) |
Why Loto is important?
LOTO is a very serious safety practice that helps to provide protection to employees. Equipment and machinery identified for LOTO are capable of unexpected start-ups which may result in the harmful release of hazardous energy. This is why the lock and tag are so crucial to employee and visitor safety./span>
What is safety tag?
Safety tags are used to prevent accidents in hazardous or potentially hazardous situations that are out of the ordinary, unexpected, or not readily apparent. Tags shall be used until the identified hazard is eliminated or the hazardous operation is completed.
What is the importance of lockout tagout?
It was created to prevent the unexpected start-up or energizing of equipment during service and maintenance operations which could cause employee injuries and prevent the release of stored energy which could cause employee injury.
Why is it important to lock out power source before working on a circuit?
Always test a circuit to make sure it is de-energized before working on it. Lock-out/tag-out saves lives. Lock-out/tag-out is an essential safety procedure that protects workers from injury while working on or near electrical circuits and equipment.
Why Energy isolation is important?
This procedure provides protection for people, equipment, and the environment from the dangers of uncontrolled, unblocked, unlocked, or unplanned releases of energy (i.e. movement of equipment, from electrical, hydraulic, pneumatic, or other sources of power and exposure to hazardous or toxic material, etc.)
What is lock out/tag out training?
The Lockout/Tagout standard requires the adoption and implementation of practices and procedures to shut down equipment, isolate it from its energy source(s), and prevent the release of potentially hazardous energy while maintenance and servicing activities are being performed.
What is an authorized employee?
What Are Authorized Employees? A person who locks out or tags out machines or equipment in order to perform servicing or maintenance on that machine or equipment. An affected employee becomes an authorized employee when that employee’s duties include performing servicing or maintenance covered under this section.
Does OSHA require a written energy control program?
OSHA’s standard establishes minimum performance requirements for controlling hazardous energy. The standard specifies that employers must establish an energy-control program to ensure that employees isolate machines from their energy sources and render them inoperative before any employee services or maintains them.
What are the required components of an energy control program?
The energy control program has three core components: energy control procedures, employee training, and periodic inspections. Periodic inspections of the energy control procedures ensure that the procedures and the requirements of the standard are being followed.