Which method will help you to center your vehicle in a lane?
use front-mounted cameras to watch the lane markings on the road. They adjust the steering to maintain a center position in the lane.
Why do you need to check often behind you by looking at the rear view mirror when traffic is heavy?
Why do need to check often behind you by looking at the rear view mirror when traffic is heavy.? This is the only way you will know if some one is following you too closely or coming up too fast. You should always scan ahead so that you can make multiple decisions to handle all the traffic situation at one time.
Which mirror has the widest field of view drivers ed?
Most passenger cars are equipped with one inside mirror and two outside mirrors. The inside mirror provides the driver with the widest field of view.
In which three places must you never park your vehicle?
Opposite or within 10 metres (32 feet) of a junction, except in an authorised parking space. Near the brow of a hill or humpback bridge. Opposite a traffic island or another parked vehicle.
Which one of the following is most likely to cause you to lose control of your vehicle on a bend?
Approaching a corner or bend too fast may cause you to lose control of your vehicle. You should brake to a safe speed before entering the corner or bend because the vehicle will remain more stable and controllable if braking is done in a straight line.
How much space do you need between parked cars?
Leave 3 seconds of space between you and the vehicle ahead of you. Make sure you can stop safely, if necessary.
How can you deal with a bend safely?
When taking a left-hand bend:
- keep your car to the centre of the lane.
- do not get too close to the left, as this is likely to restrict your view of the road ahead and give you little time to deal with hazards in the bend.
- As you enter the bend turn the steering wheel smoothly and progressively.
Which gear is best for turning corners?
You have to slow down and be in the right gear before taking the corner which would let you to exit the corner with maximum acceleration. Depressing the clutch while taking a corner would lead to weight transfer which could upset the stability of the car. No, you do not have to depress the clutch when turning corners.
Why should you keep well to the left as you approach a right hand bend?
When approaching a right-hand bend, you should keep well to the left. Why is this? Explanation: Doing this will give you an earlier view around the bend and enable you to see any hazards sooner.
Should you break around corners?
The basic rules of cornering are: Always brake to your desired speed before you enter a corner. Only brake on a corner in an emergency. Turn your steering wheel smoothly while you are taking the corner and avoid tugging it to one side.
What should you do when approaching a sharp bend in freezing conditions?
What should you do when approaching a sharp bend? Explanation: Harsh use of the accelerator, brakes or steering is likely to lead to skidding, especially on slippery surfaces. Avoid steering and braking at the same time.
What will happen if you brake firmly as you drive around a right-hand bend?
Explanation: On a right-hand bend, cornering forces will transfer more weight to the nearside wheels. If the brakes are also applied, the transfer of weight forward, combined with the cornering forces, puts more weight on the nearside front tyre – and this makes the car less stable.
How do I stop my car from Skiding?
A few tips for preventing skids:
- Make sure your tires have adequate treads.
- Drive slowly in wet, icy, or snowy conditions.
- Keep an appropriate distance between you and the car ahead of you.
- Slow down before entering a curve or bend.
What causes skidding on bends?
Combinations – skids are most often caused by excessive speed, coupled with too sharp a turn for the vehicle or braking when turning, or “normal” speed coupled with ice or snow or gravel on the road, etc. A gust of wind, a change of road camber, or a slight turn can create an unpredictable and uncontrollable skid.