Why are there 2 switches in my room?
It’s possible that the second switch goes to a nearby receptacle (which may have been designed that way with the idea that a lamp would be plugged in there) or, alternatively, it is for a ceiling fan that may not be present (the wiring is roughed into a ceiling box that may only have a light in it at the moment).
Which switch controls which light bulb?
Open the door. If the light is on, then switch number 2 controls it. If the light is off, then go and feel the bulb with your hand. If the bulb is hot, then switch number 1 controls it, and if the bulb is cold, then switch number 3, the one you did not touch, controls it.
Which circuit will have the brightest bulb Why?
Bulbs in parallel are brighter than bulbs in series. In a parallel circuit the voltage for each bulb is the same as the voltage in the circuit. Unscrewing one bulb has no effect on the other bulb.
Can you use 2 wires 3 wires?
Three-wire Romex can be used to power two separate circuits that share the neutral. For example, here the black wire feeds a receptacle circuit, while the red feeds a lighting circuit. Although multiwire branch circuits are permitted by code in certain cases, the author doesn’t recommend them for residential wiring.
Can you run two wires one breaker?
If your home has a double tapped circuit breaker, this means that two wires (conductors) are connected to one specific circuit breaker or one terminal on the same circuit breaker. You may also hear this condition referred to as a “double lug.” Some circuit breakers are designed to hold two wires.
What happens if we connect two phase wires?
If you connect two wires of the same phase, nothing would happen, except that the line can be treated as a double circuit line which would now have double the current carrying capacity. Also, when you want to short two lines of the same phase, make sure they are of the same voltage level and frequency.
What does 2 Phase mean in electrical?
A two-phase motor is a system that has two voltages 90 degrees apart, which is no longer in use nowadays. The alternator is composed of two windings placed at 90 degrees from each other. They require 2 live and one ground wire that work in two phases.