Why is front axle wider than rear?

Why is front axle wider than rear?

While cornering and braking weight transfer takes place diagonally that is from rear right to front left or vice versa. Larger front track width decreases this weight transfer. Rear wheels closer helps in attaining traction. Front tire wider than rear also helps in steering (decreases turning radius.)

Why are trucks wider in the front?

Wider front track gives more room for all the equipment while still allowing big steering angles. Wider rear track just makes for a more expensive and heavier rear axle.

Are all Dana 60 the same width?

A 60″ axle with zero offset will give approximately the same tire width as a widetrack with a typical 15″ negative offset.

How wide is a Dana 44 front axle?

This Dana 44 uses 11″ drum brakes and the most common ratio is 3.73. The axles will interchange between the models and use a 5 on vehicles during that time period. Dana 44 axle tube diameter ranges from 2.5″ to 3″, while the Dana 60 axle tube diameter is 3.125″.

How wide is a Wagoneer Dana 44?

Long Jeep Fan My 78 narrow track waggy front dana 44 was narrowed by 3.5″ and is now right around 56-56.5 inches wide which would put the stock width at 59.5-60″ I could go home and measure it for sure if you want.

How do I identify my Dana 80 rear axle?

The Dana/Spicer Model 80 is an automotive axle manufactured by Dana Holding Corporation and has been used in OEM heavy duty applications by Chevrolet, Dodge, and Ford. It can be identified by its straight axle tubes, 10 bolt asymmetrical cover, and a “80” cast into the housing.

How do I identify my Dana 60 rear axle?

It can be identified by its 10-bolt rear cover, which appears to be lying on its side. Each Dana 60 has a build date and bill of materials numbers stamped into the back of the passenger-side axle tube. These numbers are fairly small but they are always on original axles.

Is the Dana 50 a good axle?

The Dana 50 was made as a solid axle and as a Twin Traction Beam (TTB) which pivots in the center allowing the wheels to move independently of each other. A unique quality of the Dana 50 axle is the lack of variation in both TTB and Solid axle versions, which simplifies repairs and upgrades.

Is a Dana 50 a 1 ton axle?

IE dana 44, dana 50, I beam, 10 bolt. Not all 8 lugs are one ton, so verify with a manual of some kind. All Axles Defined!

What size ring gear is in a Dana 44?

8.5 inches