Will a C6 transmission bolt up to a 460?

Will a C6 transmission bolt up to a 460?

The 351m, 400, 429, 460 all bolt up to the C6 transmission without any adapters. But if you want a 429 or a 460 you need a kit for it to be able to fit into the engine bay without problems such as control arms, steering, exhaust, motor mounts, etc.

What engines will a C6 transmission fit?

The C6 was an automatic transmission used on engines such as the 351 Cleveland and the Ford 385 engines. Some well-known applications of the C6 transmission are the Ford Torino, Thunderbird and Mustang (This transmission has no relation the C6 Corvette).

Will a C6 transmission fit a 390?

A c6 will fit but you need one with the smallblock bellhousing pattern FE pattern is different.

What transmission will bolt to a 390 Ford?

Re: 390 Transmission compatability The 4 speed bellhousing will bolt up the Top Loader and Tremec TKO transmissions.

How do you adjust the transmission band on a Ford C6?

Adjusting the bands is a straight forward process. Just get the car safely up on jacks. Locate the intermediate band adjustment (the front one), loosen the locknut, torque down the adjustment screw to 10 ft lbs and then loosen it exactly 1 1/2 turns. Tighten locknut.

What transmission is in a 351 Windsor?

B&M Full Race Automatic Transmission – Ford C6. 1962-2000 Ford 289, 302, 351 Cleveland & 351 Windsor 2-Wheel Drive, Manual Shift Valve Body. The B&M C6 PreRunner/Trail automatic transmission is for use in RWD Ford applications with a 13 1/2-inch tailshaft and 5 1/8-inch separation of top bellhousing bolts.

Will a C4 transmission fit a 351W?

Premium Member. Should be no problem. C4 was a SBF tranny, and should have no issue re: bolt pattern for the 351W, since it probably came on a 302.

How much horsepower does a C4 transmission use?

A built C4 for the street will hold 500HP, and a race C4 will hold over 700HP, but unfortunately the stock C4 behind a 450HP motor isn’t going to last long, do yourself a favor and rebuild the one you have.