Will Wrangler wheels fit a commander?
Yes – starting in 2007, the Wrangler used a 5 on 5 bolt pattern, the same as the XK and the WK. You will need at least a 1″ wheel spacer however, as there is a ‘ridge’ cast into the wrangler wheels behind the spokes that will not clear the XK brake caliper.
What size tires go on a 2008 Jeep Commander?
| 2008 Jeep Commander | ||
|---|---|---|
| Rim Size | Tire Sizes | Jeep Commander Options |
| 17-Inch | 245-65-17 | LimitedOverlandSport |
| 18-Inch | 245-60-18 | Overland |
What size tire goes on a 2006 Jeep Commander?
P245/65R17
How big of tires can I put on my Jeep Commander?
Commanders and WK’s are pretty much the same. The limiting factor tends to be the upper bolt near the top edge of the tire. Largest tire on stock would be either 255-65R17 or 265-65R17, depending on the shape of the tire. Rounded corners will allow for the 265.
What size are Jeep Commander wheels?
Jeep Commander wheel bolt pattern. Select the year
| Commander Bolt Pattern | PCD 5×127 See Adapters |
|---|---|
| Thread size | M12 x 1.75 Buy Lug Nuts |
| Stock Rim Sizes Range | 16×7.0 – 22×9.5 Get Hubcaps |
| Custom rim sizes range | R20 – R20 |
| Tire sizes | 245/65 R17, 245/60 R18, 255/55 R19, 255/50 R20 |
What lug pattern is a Jeep Commander?
Jeep Wheel Specifications | Jeep Wheels | Morris 4×4 Center
| VEHICLES/YEAR RANGES | O.E.M WHEEL SIZE | LUG PATTERN INCHES |
|---|---|---|
| 2007-2017 Jeep Compass, Patriot | 16″-18″ | 5×4.5 in |
| 2018-2020 Jeep Compass | 16″-20″ | 5×4.33 in |
| 2002-2012 Jeep Liberty | 16″-18″ | 5×4.5 in |
| 2006-2010 Jeep Commander | 17″-18″ | 5×5 in |
Will wheel adapters make my wheels stick out?
Q: Will adapters make my wheels stick out? A: Adapters are also spacers. However that does not mean it will automatically make your wheels stick out past your fenders. This is because wheels come in all different “offsets” or “backspacing”.
How much does it cost to install wheel adapters?
Wheel spacers tend to cost between $65 and $100 each. If you have a mechanic do it for you, it will cost around $200 to $400. If you do decide to have a professional do it for you, you will have a few options as to where to take your car for the installation.
How much does it cost to get a spacer lift installed?
The kit was $229 and the install cost was about $200. But after looking at how it’s done I should have saved the $200 and just done it myself. A spacer lift isn’t difficult to install as far as I know.
How much does it cost to get spacers installed?
As they said wheel spacers you just jack up the wrangler, take the wheel off and then bolt on the spacer. Its easy, and straight forward. If you end up bringing it to a shop, they are going to charge you top price for the parts, and then labor. Depending on the shop, it can be anywhere from $200-$400 in labor.