How do you get the spare tire off a Jeep Commander?

How do you get the spare tire off a Jeep Commander?

Open the back of your Commander and you will find a small hole with a plug in it under the cover for your jack. Take the plug out and use the tool to turn the bolt that releases the cable that is holding up your spare.

Where is the jack on a Jeep Commander?

under the back seats, jack is under the driver’s side backseat, tire iron & rods are under passenger’s side backseat.

Which side of the spare tire faces out?

Be sure to install the spare tire the correct way and not backwards. The valve stem of a doughnut tire should face outwards, away from the vehicle. If your vehicle uses acorn-style lug nuts, it is easy to put those on backwards as well. Be sure the tapered part of the nut faces the wheel when tightening it down.

Can you put a spare on the front?

It is also recommended to only use a donut spare tire (smaller than a regular tire) in the rear of the car, and not on the front. Driving longer distances on a spare in the front can also lead to certain parts of your car being damaged, since the tire is a different size.

When changing a flat tire you should quizlet?

Terms in this set (13)

  • Things You Will Need. Car Jack.
  • Find a safe spot to pull over.
  • Turn on your hazard lights.
  • Use the wrench to loosen the lug nuts.
  • Use the jack to lift the vehicle off the ground.
  • Remove the lug nuts and pull the tire off the car.
  • Place the spare on the car.
  • Put on the lug nuts.

At what speed can you start hydroplaning?

Most automobile safety experts agree that hydroplaning is most likely to occur at speeds greater than thirty-five miles per hour. As soon as the first drops hit your windshield, slow your speed considerably.

What actions should you take if a tire blows out quizlet?

What actions should you take if a tire blows out? When a tire blows out, you need to gain control of your vehicle without braking. You need to drive off the roadway slowly, turn on hazard flashers, and find a safe place to stop.

Which wheel should you block when changing a tire quizlet?

Block the wheel that is diagonally opposite the flat tire.

When replacing a tire you should place the lugs back on and tighten them in what pattern quizlet?

-when you tighten them tighten them in a star pattern. You just studied 27 terms!

What shape pattern do you need to follow when tightening the lug nuts?

star-shaped pattern

Which of the following could cause you to lose traction on the road?

Loss of Traction – Common Causes Loss of traction happens when tires lose their grip on the road. Here’s why: OVER-BRAKING – Braking too hard can lock up the wheels. OVER-STEERING – Turning the wheels too sharply can cause the back end of the vehicle to slide out.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top