How can you tell a 727 transmission?
You can easily identify an A-727 by its oddly shaped 14-bolt oil pan. The A-727 uses a paper fluid filter and has two transmission bands, one for reverse, and the other is a kickdown band. All shift ratios were 2.54:1 for first gear, 1.45:1 for second gear and 1.0:1 for third gear. Reverse gear is 2.21:1.
Is the 727 a good transmission?
The A-727 transmission is robust and highly adaptable in several applications which can be attributed to its widespread use in about 30 years. Its strength meant it could be used in Chrysler cars and non-Mopar applications such as work trucks as well as high-performance vehicles like sports cars.
How much power can a 727 handle?
The 727 is a relatively simple piece when compared to other automatic transmissions, and its strength is a function of that simplicity. We’ve put stock TorqueFlite transmissions behind big-blocks pushing upwards of 600 hp and found they not only survive, but perform quite well.
How much does a Gear Vendors overdrive cost?
At about 2600 dollars (depending on model) the GEAR VENDORS is not the cheapest way for you to get overdrive but is by far the best. A Gear Vendors will handle more horsepower, deliver bigger performance gains, give you guaranteed trouble-free performance, and install easier than any other overdrive available.
Does a 400 Turbo have overdrive?
The Turbo 400 has earned the reputation of a tough, reliable transmission that can survive harsh duty, but is there a better alternative? Although not often considered as such, much like the Turbo 400, the 4L85E is a solid contender for use in heavy, high-horsepower vehicles, and has the added benefit of an overdrive.
Should I drive with overdrive off?
Overdrive improves fuel economy, and makes for less wear and tear on the vehicle when you are driving at highway speeds. Having the overdrive off is fine if you are driving in hilly areas, but if you are on the highway, it is best to have it on because you will get better gas mileage.
Does a Turbo 350 have overdrive?
Overdrive. The 700R4 has an overdrive while the TH350 does not. Overdrives allow for high-speed cruising, which saves fuel while lowering torque.
Is a TH400 better than a TH350?
The TH350 uses a mechanical kick down switch, whereas the TH400 uses an electric one. A lot of people claim that he TH350 has less drivetrain loss than the TH400, which means that all things being equal, the TH350 is going to get more power to the rear wheels from an engine with equal power.
Will a 200r4 bolt up to a 350?
The plate will have a two- or three-letter transmission code in large letters. This transmission is ideal for swapping with a TH-350 or a Powerglide, because the overall length and the bell housing bolt pattern of the TH-200-4R are the same, and your original driveshaft does not have to be shortened.