Does 350 and 454 motor mounts the same?
They are all the same. All mounts will have the bolt location in the same spot. If there is a difference it will be in the frame and not in the mounts.
Will a 454 bolt up to a th350 transmission?
the 454 chev flywheel / flex plate will bolt to a t-350 converter IF it is a dual pattern flex plate.
Are small block and big block Chevy motor mounts the same?
It’s a common misnomer that conventional big- and small-block Chevy engine-mounting systems are completely interchangeable. Yes, the cylinder-block engine-mounting bolt patterns are identical and are located the same relative distance forward from the rear bellhousing face.
Will 454 headers fit a 350?
The 350 accessory brackets won’t fit the 454.
What is the difference between LS and LT engines?
The LT’s direct injection fuel system is vastly more complex than any LS engine’s. The LT also lacks a power steering pump for those that are looking to retrofit a Gen V engine into a vehicle that has hydraulic power steering.
Which is better LS or LT?
Depending on the model you select, there may be many trim levels available, but most drivers find it useful to start by comparing the LS vs. To put it most simply, the LT is a trim above the LS in almost every Chevy model. In other words, the LS model will be the most affordable, and it will still offer great value.
Is LS2 a good engine?
Alongside that, it also has full-floating pistons, a higher compression ratio, a higher RPM limit, larger bore cylinder heads, much hotter ignition coils and a better timing chain. The LS2 also has the convenience of being one of the most adaptable engines, with the ability to fit LS1, LS6, LS3, and L92 cylinder heads.
How much horsepower does a LS2 engine have?
LS Family = Gen. 4, 6.0L, Aluminum Block, Car Engines
| Performance Specifications | |
|---|---|
| Compression Ratio | 10.9 : 1 |
| Horsepower Rating | 390-395 hp. |
| Torque Rating | 400 ft./lbs. |
How much horsepower can you get out of a LS3?
Both the LS3 and L99 engine blocks can be pushed to 850 to 1,000 horsepower. Both engines use rectangle port cylinder heads and have a common 4.065-inch bore diameter. They also have the internal oil passages for Active Fuel Management (AFM), even if unused.
How much horsepower can a stock LS3 bottom end handle?
The block can handle 850 to 1000 horsepower. However, you will want to upgrade to Head Studs and Main Studs if you plan on using boost or nitrous.
How much power can you get out of a 6.2 LS?
You can pick up as much as 30 horsepower at the wheels with the right set of headers helping the 6.2-liter motor breathe deeper.