Where is trailer brake fuse?

Where is trailer brake fuse?

If the trailer brakes will operate with the manual switch, but not when the truck brakes are applied, check the CHMSL fuse in the fuse box under the hood. The lid to the fuse box will have a legend that will help you locate the fuse.

Where is the trailer light fuse on a 2004 Chevy Silverado?

When I connect any trailer to my 2004 Chevy Silverado Truck 7 pin connector, it will blow the 10a fuse located at the drivers side dash. This fuse goes to the left rear trailer brake/trun.

Does tow haul have a fuse?

The Chevrolet Silverado does not have a tow haul mode fuse. It’s fitted with a tow haul switch, which will accept power directly from the body control module (BCM).

What does RDO fuse stand for?

audio system

What is ATC fuse?

ATO fuses and ATC fuses are regular-sized automotive blade fuses. They are interchangeable, provided the amperage rating is the same. The housing can be open or closed, but neither is sealed or waterproof. Used in automotive, watercraft and low-voltage applications (maximum 30 volts)

What does ATO stand for fuse?

The fuses in question are all the newer blade type fuses… ATO and ATC are actually the same fuse (size and shape), but, “C” stands for closed and the “O” stands for open.

What fuse should I use for my amp?

The correct size of fuse to use depends on the amp you are wiring. If your amp has an internal fuse, then your inline car amp fuse should be a bit larger. For instance, if your amp has an internal 20 amp fuse, then you should go for a 25 or 30 amp inline fuse.

What size fuse do I need for a 3000 watt amp?

Fuse rating = (watts/volts) x 1.25

Inverter Voltage	Continuous Watts	Fuse Size (DC Amps)
12 Volt	3000	400
24 Volt	600	50
	800	75
	1000	80

Can I use a 10 amp fuse instead of a 5 amp?

Possibly yes. It is possible to short out a circuit by overdrawing more than 5 Amp by removing the 5 Amp fuse and putting in a 10 Amp fuse.