How do I connect my headphones to my PS2?
Yes, get an adapter from Radio Shack (or wherever) that does 2 L/R RCA to a female headphone jack (or male, and get a gender-bender), then just plug your headphones in there. You may want to use a set with volume control, though.
What happens if you plug headphones into an outlet?
Nothing at all would happen. Okay, you might slightly bend the recepticle in whichever socket hole you stick your jack (depending on whether it is a 3.5 or a 6.3 mm jack). But there will not be sparks, nor a pop, or even a blown fuse, and your headphones will just keep working completely fine and totally unaffected.
Can you use headphones through USB?
Computer headsets generally feature one of two types of connector: mini plug or USB. Either connection works well for a headset, but one is analog and one is digital. To have sound output to headset and speakers, you need to use a USB headset or plug the headphones to a headphone jack on the computer.
Can I plug headphones into line in?
NO. You cannot use either the line out OR the speaker out for headphones. The first will get you nothing but a quiet, distorted sound in your phones, and the second will get you a destroyed pair of phones. You need a headphone preamp.
Are headphones line-in or out?
the only difference between a line out and a headphone out is that line out is made to drive a high impedance load about 5-10 kOhm. headphones are between 15-200 ohm (not kOhm) so by adding a resistor or better a Potentiometer in series to you headphones you increase the overall impedance.
Is line out the same as headphones?
Line out is meant to be connected to an external amp. It does not have an amp built into the line out, and it is not intended to drive headphones. You may not be able to control the volume from the line out, as that job typically goes to the amp.
What does headphone line out mean?
Alternatively referred to as audio out and sound out, the line out jack is found on computer sound cards. It allows external speakers, headphones, or other output devices to connect to the computer, transferring computer generated audio to the devices so that it can be heard.
What is line out for audio?
Connecting Audio through Line Outs A line out jack can be simply described as taking the audio signal (voice or music) from the source and forwarding it through the connected cable to another mechanism.
Is Audio Out same as pre-out?
Is pre-out called low level or something else? Pre-out = line level = low level. But, pre-out would typically imply “volume control” while line out would typically imply “no volume control”.
Is line out a pre-out?
Line out is *normally* a fixed voltage signal unaffected by the volume control. Pre-out is normally a variable signal since it is intended to be connected to a power amp, in this case adjusting the volume control adjusts the output signal level as a power amp is traditionally fixed gain.
Do speakers go in line out or line?
Plug the speaker cable into the green “Line-out” jack of a desktop computer. Often, this cable will also have a green colored connector. Plug the speaker cable into the headphone jack of a laptop.
Can you connect speakers to line out?
If those are really line out then you need a second amplifier. The signal on a line output terminal won’t drive a speaker, it is intended as an amplifier input.
What is a Line Output Converter for?
A: A line output converter, or LOC for short, converts a speaker-level output signal into an RCA preamp-level signal. This lets you connect the radio to the amplifier.
What is a high to low converter?
HILOW is the obvious choice if you want to use the original stereo in your car but still connect an amplifier or an amplified enclosure equipped with low-level inputs. The adapter converts the signal from the car’s speaker outputs (high level) from the stereo to low level.
Does a line out converter need to be grounded?
Anyways this type of line out converter needs to be hooked up to both constant power and ground in addition to the speaker wire inputs. This system uses a signal sensing input to then provide a dedicated remote output for your amp. If you have a test light or multimeter check that your power connections are correct.