Are all T5 transmissions the same?

Are all T5 transmissions the same?

While there are numerous configurations of the T5, because of the large quantities of T5’s produced, many parts are interchangeable. There are now over 200 different T5 transmission assembly part numbers and almost as many ways to customize them to fit just about anything whether passenger car or light duty truck.

What does a T5 transmission fit?

GM used the T-5 in the 1982 and up S/T series pickups and small Blazers, and their Astro vans. They began installing them in 1983 in the Camaros and Firebirds. Nissan also liked the idea of an internal shifter linkage five-speed, and they used this transmission in the 280ZX/300Z cars as well.

What did Ford T5 come in?

Ford stopped using the World Class T5 in V8-powered cars after 1995, but it would live on in the V6 Mustang until 2010. GM’s approach to the World Class was similar, as it became the manual transmission of choice in the six-cylinder F-Body until the Camaro and the Firebird/Trans Am were discontinued in 2002.

How do I know if I have a Borg Warner T5?

The Borg Warner T-5 is generally identified by a 1352-xxx number stamped on a metal tag on a tail housing bolt. This tag is normally under the second bolt from the top on the left side of the transmission. While Ford used aluminum for these tags, GM used steel which is prone to rusting.

How much power can a Ford T5 handle?

New Member. 89 T5 is rated at 285ft/lbs, it will all depend on how it was previously used.

What is the difference between T5 and T5 world class?

There are two generations of T-5 transmissions; from beginning of production until mid-1985 these units were referred to as “non-world class” units. The most important difference between the non-world class and the world-class transmissions is the torque rating. Later is better (or the higher the tag number).

How much HP can a 3.8 Mustang handle?

So assuming you have a 99+ 3.8L V6, your base is 190HP. Add in a Cam, some minor head and manifold porting, exhaust, and other bolt-ons, you can get to 250HP. Then add a Supercharger and Intercooling with boost around 8psi and a custom chip for the setup, you can get another 100HP out of the engine.

What is a TKO 600 transmission?

Serving up 600 lb-ft of torque capacity, along with confidence-inspiring shifts and fuel-saving overdrive, the TKO offers an ideal blend of brute strength and street manners – which may be why it’s the manual transmission behind more boulevard-bruising street machines and sportsman race victories than all of its …

How much power can a TKO 600 handle?

Rated to 1000 hp.

What is the difference between a TKO 500 and a TKO 600?

The difference between the 500 and 600 is the gear ratios. The 500 has a 3.27 first gear, the 600 has a 2.87. Less gear multiplication allows more torque input. The closer ratios have less rpm drop between gears which will suit an engine with a narrow power band.

What cars came with Tremec TKO?

The TKO-600 became available in 2003. The 3 vehicles that had a Tremec 3550 was 1993 Cobra-R, 1994 & 1995 Cobra-R. They were not production cars but assembled for Ford.

What is the strongest manual transmission?

The Tremec TKO 5-speed is the transmission that started a revolution in manual overdrive conversions. It is one of the most versatile 5-speed transmissions in the market today, as well as one of the strongest. With an impressive 600 lbs./ft.

What cars have Tremec 5-speed?

Applications

• 1982-83 AMC Spirit.
• 1982-83 AMC Concord.
• 1982-88 AMC Eagle.
• 1982-86 Jeep CJ-7.
• 1984-86 2.5L Inline 4, 2.8L V6, and turbo diesel Jeep Cherokee XJ/Comanche MJ.
• 1984-86 Ford Mustang SVO (World-Class T-5 1985-1986)
• 1983.5-1995 V8 Ford Mustang (World-Class T-5 1985-1995)

How much HP can a Tremec 3550 hold?

Senior Member. The 3550 is rated for 350 in a 5500lb vehicle. The TKO II is rated for 475 in a 5500lb vehicle.

What does Tremec stand for?

The name TREMEC stands for ‘Transmissions and Mechanical Equipment’.

What is a Tremec 3550?

The TR-3550 five-speed overdrive transmission was developed to provide great torque capacity and is ideal for specialty sports cars equipped with high torque engines. The 3550 was both a product and a product line. Each model had two versions, one being a 0.68 overdrive and the other being a 0.8 overdrive.

How do I know what Tremec transmission I have?

How to Locate a TREMEC Part Number

1. Locate the transmission. Find the rear extension housing, which is connected to the main case.
2. Check for a metal tag attached to one of the bolts.
3. Locate the TREMEC part number by identifying the alphanumeric number, which begins with a “T” for most transmission models.

How do I know if I have a t56 Magnum?

When you push or pull the shift handle from inside the vehicle, the rail operates these forks. The Magnum is shown at left and the T-56 is on the right.

What did the TR6060 come in?

The Tremec TR6060 6 speed manual transmission debuted in 2008 and quickly became a widely available transmission in many new performance cars including the Dodge Viper, C5 and C6 Corvettes, 5th- and 6th-generation Camaros, Dodge Challenger and others.