Can you have different size tires on front and back of car?

Can you have different size tires on front and back of car?

Mixing different tread depths is generally permissible. The tire industry recommends fitting the new tires onto the rear axle. Some car manufacturers will recommend fitting the new tires to the front axle, for example, if the car is a front-wheel drive.

Where do I find the size of my tires?

The tire size for your vehicle and wheels can be found in two places: Sidewall of your tire. Inside frame of the driver side door.

What number is the height of a tire?

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

How do you read tire information?

How To Read A Tire Sidewall

1. TIRE SIZE.
2. P identifies your tire as a Passenger Tire.
3. 225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters.
4. 50 is the two-figure aspect ratio.
5. R indicates the construction used within the tires casing.

What does V mean on tires?

Speed Rating

What does the first number on a tire mean?

The first number to appear in your tire size information is the width, in millimeters, of the correct tires for your vehicle: P225/70R16 91S. Tire makers calculate the aspect ratio by dividing a tire’s height off the rim by its width. If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width.

What do the numbers and letters mean on a tire?

The last grouping of characters, tied to the tire type, size and construction, represents the load index and speed rating. Also known as the service description, the number indicates the maximum load the tire can support when inflated properly, and the letter represents the maximum speed capability of the tire.

What does the letter D mean on tires?

diagonal bias ply construction

Is it OK to fit Tyres with a higher load rating?

It’s absolutely crucial to the safety of your driving experience that you select a tyre with an appropriate load rating for your vehicle’s needs. If in any doubt at all, always go for a higher load rating than you need, as this won’t cause any harm to your vehicle.

What’s the difference between regular and XL tires?

The primary difference between SL and XL tires of the same size is that a higher pressure can be used with an XL tire which, in turn, increases the tire’s load capacity. XL tires are also resistant to mechanical damages and are able to endure high speed driving pressure as well.

Will bad tires cause front end wobble?

If the bad tire is in the front, the steering will rock back and forth, if it’s in the rear, the rear of the car will wobble in a similar manner. The most common cause of vehicle wobbles in this speed range is a bent wheel or mildly out of round tire.

Can bad tires cause vibration when accelerating?

#3 – Unbalanced Tires As a tire rotates, any slight weight imbalance will turn into a small vibration. At higher speeds where the tire is rotating much faster, the vibration will be more noticeable and your steering wheel will actually shake.

Why does my car shake with new tires?

If you’re experiencing vibrations after a new set of tires was installed, it’s possible the tire technician didn’t quite hit the mark on balancing one or more of your tires and wheels. The wheel weights that create wheel balancing are applied to the inner wheel with adhesive.

Does needing an alignment cause shaking?

When your car’s wheels aren’t properly aligned it can cause your tires to wear very quickly or unevenly. Bad alignment can also cause your steering wheel to shake and vibrate, which over time can make driving very uncomfortable.

What causes a car to vibrate while driving?

Vibration is usually caused by an out of balance or defective tire, a bent wheel or a worn driveline U-joint. You may find that the car shakes the car in an up and down motion. You may feel vibration through the seat, the steering wheel or even in the brake pedal.

How much vibration is normal in a car?

A vehicle that is operating normally should measure at about 1,000. When a vehicle’s RPMs fall below or are increasingly higher than normal, especially if the car vibrates when idle, something is not right.