How do I fix my airbag light?

How do I fix my airbag light?

How to Reset an Airbag Light

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

How do you reset the airbag light on a 2013 Hyundai Elantra?

How to Reset the Airbag Light on a Hyundai

  1. Find the diagnostic-link connector underneath the driver’s side of the car on the dashboard.
  2. Put the key into the ignition and turn it two clicks forward to the “On” position.
  3. Turn on the OBD II code reader and use the arrows to navigate the menu.

How do you fix the airbag light on a Hyundai Elantra?

How to Diagnose & Reset Hyundai Airbag Light

  1. Locate the OBD-II port under the dashboard.
  2. Plug-in the scanner that can read airbag fault codes on a Hyundai.
  3. Turn the ignition to position II.
  4. Select the Hyundai, then select the model (Elantra, Tucson, Accent, Santa Fe, Sonata, Genesis, Azera, Veloster, Equus, etc.)

How do I turn off the airbag light after an accident?

Here’s how to turn off airbag light.

  1. Turn the ignition on.
  2. Push the switch to the “ON” position.
  3. The airbag light will turn on.
  4. Test again by repeating the above steps two more times.
  5. Start the car’s engine.
  6. The car’s airbag light has been reset.

Are Hyundai affected by airbag recall?

Is my Hyundai vehicle affected by the Takata airbag recall? Hyundai Australia vehicles are not affected by the Takata Airbag recall.

How do you turn the airbag off in a Hyundai Elantra?

The passenger airbag in the Hyundai Elantra is not designed to be turned off manually, but is operated through a sensor that engages it when a passenger is detected in the vehicle. These sensors are connected to the right-hand seat and seatbelt in the cabin.

Why is my airbag light on in my 2012 Hyundai Sonata?

There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.

How do you reset the airbag light on a Hyundai Tucson?

How to Turn Off the Airbag Light

  1. Turn on the ignition switch with your car key.
  2. Wait for the airbag warning light to turn off.
  3. Turn the ignition switch of your car back off for a little longer than three seconds.
  4. Repeat steps 1 through 3 twice to make three times total.

Does Hyundai warranty cover airbags?

Hyundai is extending the warranty coverage for the driver’s front airbag clock spring assembly on certain 2011-2014 Elantra vehicles, 2011-2013 Sonata vehicles, and 2011-2014 Sonata Hybrid vehicles to 15 years, unlimited mileage, from the date of original retail delivery or date of first use.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top