How do I fix the dy on my hot tub?
The most common reasons for the FLO error message are dirty filters, a low water level, clogged circulation pumps or bad sensors. The first thing you should do is check your tub’s water level. Top it off and see if this fixes the problem. Reset the tub GFI breaker to see if the error clears.
Why does my hot tub say dry?
DRY: Means insufficient water is getting to the heating element. You may have to top your hot tub. Please use a hose filter to prevent impurities from getting into your spa and plumbing system. Double check to make sure no debris is present in your circulation system before restarting.
What are the codes on a hot tub?
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| FL | Water sensor/pressure switch fault; water flow problem |
| FLC | Pressure switch fault; switch closed while pump is off |
| Fldu | Spa is in filter mode; system message, not an error |
| FLO, Flo, FL1 | Flow – inadequate water volume sensed by flow/pressure switch |
What does F1 mean on a hot tub?
On page 29 it shows that “F1” indicates the spa is running the factory default 1 hour filtration cycle. It indicates this should run one 30-minute cycle every 12 hours.
What mode should hot tub be on?
Since the heater isn’t running for long periods of time, the water temperature can vary quite a bit. This makes it less than ideal if you are planning on using the hot tub. For this reason, it’s best to only run economy mode when you’re not going to be home for 2-3 days or more.
What is the cheapest way to run a hot tub?
#1 Turn the temperature down on your hot tub The easiest way to save money on your hot tub is to turn the temperature down a few degrees. Each degree will save you approx. 10% on your hot tub energy bill. This might be a good idea if you like it a bit cooler.
Should I leave my hot tub filter on all the time?
Keeping your spa’s filters clean will not only prolong their life but also make your pump more efficient. Not cleaning your filters can result in a build‑up of debris which can result in poor water flow. The pump will therefore have to work twice as hard to filtrate the water, which may cause increased energy usage.
How often should I put chlorine in my hot tub?
How Much Chlorine Should I Add to my hot tub? A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
How do I clean my hot tub without draining water?
How to Clean a Hot Tub without Draining
- RECYCLE THE HOT TUB INTO THE POOL.
- RECYCLE THE HOT TUB INTO THE BATHTUB.
- FILTER SPA WATER THROUGH EXTERNAL POOL FILTER.
- FILTER SPA WATER WITH REVERSE OSMOSIS.
- Balance the Spa Water and Shock.
- SCRUB THE SPA.
- SCRUB THE PIPES.
- SOAK THE JETS.
Can I empty my hot tub into my lawn?
Generally speaking, there is no issue with draining your Hot Tub onto your lawn or even using the water to hydrate your flower beds. If you’re using the right chemicals and monitoring the ph level of your Hot Tub water it won’t contain anything which will damage your plants.